I'm looking for a MR load for my 243. I found some info that was taken from the Speer 13 manual for a 100 gr. Speer BT w/ CCI 250 primer and H414 powder. However there seemed to be a typo. error and I dont want to take any chances.

H414 is pretty slow,Go down to 85 W748 no H380 eighter 30.9 748 sie bu 100gr, 2600 33.3 85@2800 it wont feel has bad. still kill,cast bullets are another story. 90gr alloy lymans 10.0 of 700x 1762 v 103 rcbs h414 24- 26.0 use 250 mag primer thats an alloy @1818/1988 vel...

thanks for the info, however I already have the pills and powder. was trying to get conformation on the primer and load from someone w/the Speer 13

speer #14 pg.250 H414* meens usemag primer, 36.5@2602//40.5@2862 I woouldnt call this managed recoil but it will kill??..hope this works out.. and boattails cause higher prasures,if shooting under 250 yds dont need bt anyway. reloader 15 30.0 @2443 34.0 @ 2691 thats more managable speer loads are light anyway..

Hodgdon had a PDF file with all the calibers and H4895 powder, but i can't find it anymore. maybe someone saved it here?

Here you go. It is hard to find. www Hodgdon home/data /youth loads 4895 only

http://www.hodgdon.com/PDF/Youth%20Loads.pdf