This first one is a pattern I got from Bobby Toole. It is cpm154 stainless blade and spring. 416ss satin bolsters and caps w 410ss mill relieved liners. Knife is 4 1/16” closed with a 2 1/2” hollow ground blade w cut swedge, that is hand finished to 800grit satin. Stainless pins and my own shield paired with some pretty mammoth ivory. Flush in all 3 with nice snappy action, pull I would consider a smooth 6. $800 shipped USPS priority on this one (ppff, venmo, check)



Next up: Knife is 4 3/8” closed with a 3 1/8” hollow ground blade. Steel is cpm154 w 416ss fluted/threaded and pinched satin bolsters. Liners are mill relieved 410ss and are fileworked along the spine of the knife. Carbon fiber covers with stainless pins, shield, and lanyard tube. Flush in all 3 with great action and pull is a 5! Awesome light knife so if this one doesn’t sell, it’ll be going in MY pocket!ha $700 shipped on this one USPS Priority (ppff, Venmo, check)




And last one: This knife is 4” closed with a 2 3/4” blade. Steel is cpm154, w 416ss pinched satin bolsters and abalone covered in resin covers. Blade is hollow ground and hand finished to 800grit. Liners are 410ss and mill relieved. Spring is flush in all 3, and good snappy action w blade pull being a 5. $700 shipped on this one USPS priority (ppff, Venmo, check)

Good job bro.

Thanks Bob, I appreciate it!!