Also, there are several stock companies that copy the popular Manners and McMillan stocks. So, it could be one of those. Google the image and see what you find.
Buzz, It IS, in fact, a Tikka. Sterk Shooting bolt shroud.
The Minox is outstanding. My regular shooting buddies have a Leupold Mk6, Vortex AMG, and Schmidt & Bender PMii between them, and they all pretty much tip the hat to the ZP5.
Specs as follows:
T3 action EGW pic rail w/ ARC m10 rings CTR bottom metal that I picked up used Manners T4a bedded by Alamo Hardy Rifle Engineering CF Prefit barrel in 6.5cm w/ Hardy Titanium muzzle brake Cerakoted by JG's secret weapon gunsmith
It's a fun one to shoot!
Originally Posted by unclebubba
Just to make sure that it is done thoroughly, I go both ways.
It looks like a Manners T4A, but it's not a T4A. The forend is more rounded as well as the top of the pistol grip area.
Exactly the reason I said I wasn't 100%. The fore-end tip in the picture is very square compared to the stock T4A. However, almost everything else is exactly correct and not many others make a butthook tactical.
I found the picture but the owner never says what stock it is. I found this other picture of a similar stock, but again can't find anything out.
It looks like a Manners T4A, but it's not a T4A. The forend is more rounded as well as the top of the pistol grip area.
Exactly the reason I said I wasn't 100%. The fore-end tip in the picture is very square compared to the stock T4A. However, almost everything else is exactly correct and not many others make a butthook tactical.
I found the picture but the owner never says what stock it is. I found this other picture of a similar stock, but again can't find anything out.
It is a T4A
Originally Posted by unclebubba
Just to make sure that it is done thoroughly, I go both ways.
The Manners CTR stock will fit the Tikka T3 rifles just fine. The only issue is the bottom metal. You will need to upgrade to the CTR bottom metal for it to work. It will also need to be a short action round (308 Win, 6.5 CM, 7-08, etc). The foot print of the CTR and T3 rifles are the same. Also, the barrel channel will be bigger to fit the CTR stock, so there will be a larger gap in the barrel channel for the smaller barrel of the T3 Lite.
10-4. Thank you for the info. I am going to rebarrel my .270 WSM to a .300 WSM and use a Prefit Proof/Carbon Six/ Hardy barrel instead of using the factory barrel.
That is a T4A woodland molded in camo. That is a Tikka action in that stock and would require additional fitting as that is not made for the tikka action. It requires the rear tang area to be built up at an additional charge of $50..... (per Manners on Tuesday)
![[Linked Image]](http://www.katiecortese.com/wp-content/uploads/2012/10/texas-tech-logo-2-150x150.jpg){kind=logo}
![[Linked Image]](http://dallasreloads.com/wp-content/uploads/2017/07/THF.jpg)
Sterk Shooting bolt shroud.![[Linked Image]](http://i49.servimg.com/u/f49/12/19/51/27/tikka210.jpg)
![[Linked Image]](https://texashuntingforum.com/forum/pics/userpics/2019/08/full-25419-196082-thf.jpg)