What are you guys using for force fetch tables?

I hardly ever have more than 1 to FF at a time so I work from the ground. Sucks at times but for the most part I get through the tough part in a week or so.

I don't use one either. Use the tailgate if you need to, but I just sit on a bucket.

I ff'ed cuervo from the ground, I might end up doing the same again.

If you are only doing 1 dog at a time I don't see the need for a table. I've done a few all on the ground. Helps eliminate the problems that can arise when moving from the table to the ground.

However, that wasn't the question.


Google has some good pictures.

Bathroom counter.

lol

I used the bed of the Ranger when we did it. Going from there to the ground was a fuster for a couple of days. I'm still amazed at how "different" that little change was for her.

We probably should see some current pictures to help evaluate the situation

here ya go judd
this dude likes beer

Good looking CBR kdub.

Watch him around that beer, that breed has been known for alcoholism and bodily injury

me too ^^^

When I was working a lot of dogs I built a table with 12 foot center(plywood with 2x4 under) and 6 foot ramps each side all covered with fake turf. 4x4 posts at each end of the center section held a cable and pulley. The center section was placed on a couple of saw horses. Now with one dog every 5 years or so, I just do this on the ground.