Forums46
Topics538,024
Posts9,732,066
Members87,055
|
Most Online25,604 Feb 12th, 2024
|
|
|
DIY COnvert boss buck to spin feeder
#4933337
01/25/14 06:19 PM
|
Joined: Sep 2009
Posts: 229
amick
OP
Woodsman
|
OP
Woodsman
Joined: Sep 2009
Posts: 229 |
Has anyone converted their boss bock protein feeder to a spin type. Specifically the 350# model. I have so many extra feeder parts, i.e. boxes, motors, timers, etc, that I was hoping to just make a kit myself. Just brainstorming here, but I was think to use pvc to bottle neck the opening down to a funnel and then make a bracket for all the equipment to attach to. Any ideas, tips, or thoughts are greatly appreciated. I have seen the boss buck kits for +/- $100, but hoping to get away without spending that much.
|
|
|
Re: DIY COnvert boss buck to spin feeder
[Re: amick]
#4933459
01/25/14 08:29 PM
|
Joined: Nov 2011
Posts: 11,024
Texas buckeye
THF Celebrity
|
THF Celebrity
Joined: Nov 2011
Posts: 11,024 |
I have converted mine but with the boss buck equipment. I will say the work is super easy with boss buck, and takes only a few minutes, most of that is setting up the electronics. The biggest issue with a DIY job would be finding a way to connect it all together on the down spout tube. If you can get that part figured out (and I don't think it would be hard, I just have never thought about it ) you will hopefully save yourself some money. Good luck!
|
|
|
Moderated by bigbob_ftw, CCBIRDDOGMAN, Chickenman, Derek, DeRico, Duck_Hunter, hetman, jeh7mmmag, JustWingem, kmon11, kry226, kwrhuntinglab, Payne, pertnear, rifleman, sig226fan (Rguns.com), Superduty, TreeBass, txcornhusker
|