Forums46
Topics543,230
Posts9,795,987
Members87,446
|
Most Online25,604 Feb 12th, 2024
|
|
|
Re: How to Build a Round Feeder Pen using Hog Panels.
[Re: Stub]
#8925941
09/29/23 11:05 AM
|
Joined: Feb 2015
Posts: 5,486
flintknapper
THF Trophy Hunter
|
THF Trophy Hunter
Joined: Feb 2015
Posts: 5,486 |
You can also use Cable Clamps to join two panels together. Strong and easy to quickly remove with a battery drill. I use them on my Hog Traps. But your solution works also. ![[Linked Image]](https://texashuntingforum.com/forum/pics/userpics/2023/09/full-56101-401333-trap_em_2.jpg)
Spartans ask not...how many, but where!
|
|
|
Re: How to Build a Round Feeder Pen using Hog Panels.
[Re: Stub]
#8925958
09/29/23 11:34 AM
|
Joined: Nov 2013
Posts: 6,139
soooo
THF Trophy Hunter
|
THF Trophy Hunter
Joined: Nov 2013
Posts: 6,139 |
Electric fence wire is strong and easy to work with. If you need stronger just double or triple it. A spool of it will be a part of your estate. Overlap the panels one square and wire them on both ends. That's the end of each panel. Put three together and stand em up. Make the arch and you can do the rest of the panels while on your feet. Two or three posts will hold it in place while the arch gives it strength. Never seen a piggy breach a pen constructed that way. Of course you may be the first.
|
|
|
Re: How to Build a Round Feeder Pen using Hog Panels.
[Re: flintknapper]
#8926330
09/29/23 09:51 PM
|
Joined: Sep 2006
Posts: 32,893
kmon11
junior
|
junior
Joined: Sep 2006
Posts: 32,893 |
You can also use Cable Clamps to join two panels together. Strong and easy to quickly remove with a battery drill. I use them on my Hog Traps. But your solution works also. That is the way I built my round pens probably 12 years or ore ago. Still standing and working. bolted the panels all together and a few if us set it up round and drove in T posts to keep it stationary.
lf the saying "Liar, Liar your pants on fire" were true Mainstream news might be fun to watch
|
|
|
Re: How to Build a Round Feeder Pen using Hog Panels.
[Re: Stub]
#8927535
10/01/23 10:16 PM
|
Joined: Sep 2004
Posts: 3,074
easton1025
Veteran Tracker
|
Veteran Tracker
Joined: Sep 2004
Posts: 3,074 |
12 or 14 panels and buy you some stainless steel zip ties off amazon....thank me later...
|
|
|
Re: How to Build a Round Feeder Pen using Hog Panels.
[Re: Stub]
#8927537
10/01/23 10:24 PM
|
Joined: Dec 2006
Posts: 1,257
huntindude
Pro Tracker
|
Pro Tracker
Joined: Dec 2006
Posts: 1,257 |
t-post, string, spray paint. Very easy. Hardly any thinking involved.
|
|
|
Re: How to Build a Round Feeder Pen using Hog Panels.
[Re: Stub]
#8929647
10/05/23 01:09 AM
|
Joined: Mar 2016
Posts: 215
TxRedhawk
Woodsman
|
Woodsman
Joined: Mar 2016
Posts: 215 |
You guys are overthrowing this. Lay all panels down end to end overlapping as needed. Wire together at ends. You should end up one long panel. Get a buddy and stand up panels and bend around in a circle. Wire ends together and add t posts where needed.
|
|
|
Re: How to Build a Round Feeder Pen using Hog Panels.
[Re: Stub]
#8932344
10/09/23 06:55 PM
|
Joined: Oct 2021
Posts: 6
4J's Recovery
Green Horn
|
Green Horn
Joined: Oct 2021
Posts: 6 |
We use 10-12 panels and bailing wire, also tie them together before standing them up
|
|
|
Re: How to Build a Round Feeder Pen using Hog Panels.
[Re: Stub]
#8933258
10/11/23 12:35 AM
|
Joined: Jan 2007
Posts: 116
Drillbit
Woodsman
|
Woodsman
Joined: Jan 2007
Posts: 116 |
I strongly support the earlier recommendation to make it square or at least straight lines to each T post. If you have cows, you'll want a top strip of barbed wire, and the only way to keep the barbed wire above the panels is to run straight lines. And easier to make a door too.
|
|
|
Re: How to Build a Round Feeder Pen using Hog Panels.
[Re: Stub]
#8934418
10/12/23 06:46 PM
|
Joined: Dec 2013
Posts: 241
WendlingKnives
Woodsman
|
Woodsman
Joined: Dec 2013
Posts: 241 |
i was about to mention SS zip ties as well. Easy, fast, and outlast baling wire
|
|
|
Re: How to Build a Round Feeder Pen using Hog Panels.
[Re: Stub]
#8934477
10/12/23 09:17 PM
|
Joined: Dec 2011
Posts: 427
Geedubya
Bird Dog
|
Bird Dog
Joined: Dec 2011
Posts: 427 |
FWIW, it has been my experience that with rectangular/sqare pens that are constructed of 34" hog panel is not particulalry effective as hogs will climb out at the corners. Even have them jump the panels. Fifty-inch panel works better. Any new pen I bulid will be round using 50" panel.
Ya!
GWB
A Kill Artist. When I draw, I draw Blood
|
|
|
Re: How to Build a Round Feeder Pen using Hog Panels.
[Re: huntindude]
#8934703
10/13/23 05:12 AM
|
Joined: Mar 2010
Posts: 13,619
ntxtrapper
THF Celebrity
|
THF Celebrity
Joined: Mar 2010
Posts: 13,619 |
t-post, string, spray paint. Very easy. Hardly any thinking involved.
That’s what I did. Pushed the t posts in my tractor bucket. Just make sure it’s round so a deer can’t get trapped in a corner.
|
|
|
Re: How to Build a Round Feeder Pen using Hog Panels.
[Re: Stub]
#8935192
10/14/23 12:54 AM
|
Joined: Aug 2009
Posts: 3,696
grout-scout
Extreme Tracker
|
Extreme Tracker
Joined: Aug 2009
Posts: 3,696 |
You guys don’t have a problem with the hogs jumping over those short panels? I made a trap like that, walked up to shoot the pig and that mofo jumped over the panel, i about cr@pped myself, thankfully it ran the opposite direction of me.
|
|
|
Re: How to Build a Round Feeder Pen using Hog Panels.
[Re: grout-scout]
#8935237
10/14/23 03:04 AM
|
Joined: Mar 2010
Posts: 13,619
ntxtrapper
THF Celebrity
|
THF Celebrity
Joined: Mar 2010
Posts: 13,619 |
You guys don’t have a problem with the hogs jumping over those short panels? I made a trap like that, walked up to shoot the pig and that mofo jumped over the panel, i about cr@pped myself, thankfully it ran the opposite direction of me. I have 34” hog panels and I watch hundreds of them every day and night. Never had a hog get in and there are some monsters here.
|
|
|
Re: How to Build a Round Feeder Pen using Hog Panels.
[Re: ntxtrapper]
#8936066
10/15/23 08:01 PM
|
Joined: Aug 2009
Posts: 3,696
grout-scout
Extreme Tracker
|
Extreme Tracker
Joined: Aug 2009
Posts: 3,696 |
You guys don’t have a problem with the hogs jumping over those short panels? I made a trap like that, walked up to shoot the pig and that mofo jumped over the panel, i about cr@pped myself, thankfully it ran the opposite direction of me. I have 34” hog panels and I watch hundreds of them every day and night. Never had a hog get in and there are some monsters here. I wonder if it’s because my little pen is too small? This pig wasn’t very big, maybe 100lbs, but it jumped the panel like a fricking deer. My pen is about 15’ wide and 30’ long, I quit setting it after the escape.
|
|
|
Re: How to Build a Round Feeder Pen using Hog Panels.
[Re: Stub]
#8936078
10/15/23 08:27 PM
|
Joined: May 2014
Posts: 754
Treinta-Treinta
Tracker
|
Tracker
Joined: May 2014
Posts: 754 |
I have some very small pens in tight cover and they yield the strangest things
|
|
|
Re: How to Build a Round Feeder Pen using Hog Panels.
[Re: Stub]
#8936097
10/15/23 08:56 PM
|
Joined: Sep 2015
Posts: 1,138
Pootie
Pro Tracker
|
Pro Tracker
Joined: Sep 2015
Posts: 1,138 |
Big motivational difference between a hog wanting in to eat or out to escape death. Haven't had any getting into a pen with hog panels.
If you find yourself feeling useless, remember it took 20 years, trillions of dollars, and four presidents to replace the Taliban with the Taliban.
Sometimes the Universe puts you in the same situation again to see if you’re still a dumbass.
|
|
|
Re: How to Build a Round Feeder Pen using Hog Panels.
[Re: Stub]
#8936514
10/16/23 12:47 PM
|
Joined: Feb 2015
Posts: 2,692
Txhunter65
Veteran Tracker
|
Veteran Tracker
Joined: Feb 2015
Posts: 2,692 |
I used the hose clamps to connect all my panels to the t-posts, except the gate. No overlap, never had any trouble with hogs they're simple to put up an take down no messing with ties or wire, 3 per post where two panels come together. Found them cheap on Amazon.
|
|
|
Re: How to Build a Round Feeder Pen using Hog Panels.
[Re: TxRedhawk]
#8937848
10/18/23 02:43 AM
|
Joined: Feb 2018
Posts: 906
FWFish
Tracker
|
Tracker
Joined: Feb 2018
Posts: 906 |
You guys are overthrowing this. Lay all panels down end to end overlapping as needed. Wire together at ends. You should end up one long panel. Get a buddy and stand up panels and bend around in a circle. Wire ends together and add t posts where needed. This is what we do
|
|
|
Re: How to Build a Round Feeder Pen using Hog Panels.
[Re: Stub]
#8942542
10/24/23 12:13 PM
|
Joined: Apr 2005
Posts: 44,981
Stub
OP
THF Celebrity
|
OP
THF Celebrity
Joined: Apr 2005
Posts: 44,981 |
I see a pic of the T post inside the pen and another outside the pen. Pros & cons of either way?
“I never forget a face—but in your case, I’ll be glad to make an exception.” —Groucho Marx
|
|
|
Re: How to Build a Round Feeder Pen using Hog Panels.
[Re: Stub]
#8942807
10/24/23 07:45 PM
|
Joined: Sep 2015
Posts: 1,138
Pootie
Pro Tracker
|
Pro Tracker
Joined: Sep 2015
Posts: 1,138 |
Keeping 'em in or out... make 'em push against the post.
If you find yourself feeling useless, remember it took 20 years, trillions of dollars, and four presidents to replace the Taliban with the Taliban.
Sometimes the Universe puts you in the same situation again to see if you’re still a dumbass.
|
|
|
Re: How to Build a Round Feeder Pen using Hog Panels.
[Re: Stub]
#8942819
10/24/23 07:54 PM
|
Joined: Jul 2019
Posts: 14,832
Hudbone
THF Celebrity
|
THF Celebrity
Joined: Jul 2019
Posts: 14,832 |
Posts on inside of post. You are fencing out other animals.
|
|
|
Re: How to Build a Round Feeder Pen using Hog Panels.
[Re: Hudbone]
#8942850
10/24/23 08:40 PM
|
Joined: Apr 2005
Posts: 44,981
Stub
OP
THF Celebrity
|
OP
THF Celebrity
Joined: Apr 2005
Posts: 44,981 |
Posts on inside of post. You are fencing out other animals. Guessing you meant post on inside of panels of the pen? That is the way I had mine setup before with the post on the inside of the panel of the pen.
“I never forget a face—but in your case, I’ll be glad to make an exception.” —Groucho Marx
|
|
|
Re: How to Build a Round Feeder Pen using Hog Panels.
[Re: Stub]
#8943623
10/25/23 11:39 PM
|
Joined: Jul 2013
Posts: 6,248
tlk
THF Trophy Hunter
|
THF Trophy Hunter
Joined: Jul 2013
Posts: 6,248 |
Input on the easiest way to do it is much appreciated!! Going to put up 10 panels, they are 16' long each, so this is my train of thought, please chime in on better ways to do it. Each panel 16' long X 10 equals 160' - 6" per panel overlap = 60"/5' - 160' = 155' circumference for the round pen. Diameter of 155' circumference is 49'.3" ÷ 2 to get the radius or center of the circle would be '24.65". So I guess the obvious is to determine where I want the center of the pen to be, drive a steak there then come out basically '24.5" and start driving T Post. Does this sound right or am I missing something? Appreciate any and all help getting this done right. BTW I have 21 T Post, using three on the first panel, then two on each panel after, that way there is on on each end and one in the middle. ![[Linked Image]](https://texashuntingforum.com/forum/pics/userpics/2023/09/full-1274-400992-p3_hog.jpg) 16’x34″ .225″ Rod Diameter 4 Gauge Rod 34 lbs. With all due respect. You buy the panels. Then you lay them out on the ground. Then you lay your post down. then you start on the first post/panel and wire it up. Then you go to the next panel (the panels do bend) - then you repeat. methinks you are making too much of this process! Good luck
You can't fix stupid
|
|
|
Re: How to Build a Round Feeder Pen using Hog Panels.
[Re: TxRedhawk]
#8943630
10/25/23 11:45 PM
|
Joined: Jul 2013
Posts: 6,248
tlk
THF Trophy Hunter
|
THF Trophy Hunter
Joined: Jul 2013
Posts: 6,248 |
You guys are overthrowing this. Lay all panels down end to end overlapping as needed. Wire together at ends. You should end up one long panel. Get a buddy and stand up panels and bend around in a circle. Wire ends together and add t posts where needed. no kidding!!
You can't fix stupid
|
|
|
Re: How to Build a Round Feeder Pen using Hog Panels.
[Re: Stub]
#8943803
10/26/23 10:50 AM
|
Joined: Apr 2005
Posts: 44,981
Stub
OP
THF Celebrity
|
OP
THF Celebrity
Joined: Apr 2005
Posts: 44,981 |
Well I am surprised that none of you Buffalo Breaths caught my miss calculation! BTW I have 21 T Post, using three on the first panel, then two on each panel after, that way there is on on each end and one in the middle.
Well I am surprised that none of the Buffalo Breaths on here caught my mistake. It only takes 20 T Post, not 21. 3 on 1st panel, 2 on the next 8 and only 1 on the 10th panel for it will already have end post from 9th panel and the very 1st panel ![scratch scratch](/forum/images/graemlins/default/kopfkratz.gif)
Last edited by Stub; 10/26/23 10:51 AM.
“I never forget a face—but in your case, I’ll be glad to make an exception.” —Groucho Marx
|
|
|
Moderated by bigbob_ftw, CCBIRDDOGMAN, Chickenman, Derek, DeRico, Duck_Hunter, hetman, jeh7mmmag, JustWingem, kmon11, kry226, kwrhuntinglab, Payne, pertnear, rifleman, sig226fan (Rguns.com), Superduty, TreeBass, txcornhusker
|