.284 Win
Blueprinted Remington action
Gary Eliseo RTM chassis
26' Bartlein MTU 1/9 barrel (bead blasted)
Custom Eliseo brake
Jewel triggerl
Seekins rings
Custom pinned 20 MOA base
Vortex Gen II Razor 4.5-27
(Premier scope in the pic)

6.5 Grendel
CZ 527
Obermeyer, custom, 22 inches, 1:8.4, straight flutes
Stock factory walnut, customized for barrel pillar and glass bedded
Trigger factory single set 3lbs not set, 10oz set
Factory magazines
Bushnell 6500 2.5X15 capped target turrets
DIP 30MOA rail, Leupold 30mm rings
Gunsmith Live Oak Accuracy
Bullet Recipe 130gr Berger Hybrid and 129gr Accubond LR
Total weight 7.4lbs scoped, sling and full mag

300 Whisper built by D&T Custom Gunworks.
Reworked G2 action with 18oz trigger.
1.25" diameter "stubbed" ( basically a barrel that threaded over another barrel's action) barrel finished at 16.25".




Horizon Firearms Rem 700 re-barrel 6.5CM.
Trued action, Timney trigger, Benchmark M24 profile barrel at 16.25" with straight flutes. HS Precision stock, Burris XTR rings, Warne 20 MOA base, Nightforce NXS 5.5-22x56 NPR-1.

Accurate ordnance built
Stiller TAC 30AW
308
Rock creek 1:11.25 twist 22"
Badger Bottom metal/ aw mags
Black nitride
Manners t3a mud camo skim bedded
Timney 510 set at 2.2 lbs
Vortex precision matched rings
Nightforce 5.5-22x56 MLR
Runs a Harris S and atlas bipods

Dan Hardy Built
Rem 700 SA trued, badger knob
6.5 creedmoor
Tubbs firing pin
Side bolt release
PTG 1 piece bolt with nesika shroud
Benchmark 1:8.5 twist MTU 22"
Aics chassis with spigot and atlas
Desert tan cerakote
Nightforce 20moa rail, seekins rings
Nightforce 5.5-22x50 MLR
Timney flat shoe 2.2lbs

Tikka T3 .223
KRG Wiskey 3
Sterk bolt handle and bolt shroud.
Bushnell 3-12 LRHS pictured but now has a Bushy 3.5-21 DMR
barrel cut 22", threaded 1/2x28, running 75amax at 2960fps......

6.5 creedmoor
Surgeon SA 591r
Hawk hill heavy palma 26" 1:8 twist
KMW sentinel stock
Timney 2 stage calvin elite. 8oz/1.2lbs
KMW bottom metal
Schmidt Bender 5-25
Badger Ordnance 34mm rings
Atlas bipod
Built by David Whitson of shark suppressors
43.3 h4350 130 berger hybrid 2922 fps MV

Very nice rifles fellas. I'm surprised nobody posted up a custom AR yet haha

280 Ackley Improved
Tikka T3 Action
Bartlein 3b 5R 1:9 twist finished at 25" spiral fluted by Horizon Firearms
McMillan Game Scout in Desert Spectre
CDI Precision Gunworks bottom metal
Atlasworx aluminum bolt shroud and knurled bolt handle
Cerakoted in Black Graphite
Mountain Tactical 20 MOA Gen2 Performance Series Picatinny Rail
Spuhr Ideal Scope Mount
Tangent Theta 5-25x56 Professional Marksman 34mm Rifle Scope
Thunderbeast Arms CB muzzle brake/suppressor adaptor
Thuderbeast Arms Ultra 7 suppressor
LaRue Tactical Harris BRM-S Bipod & QD Mount Combo
Badger Ordnance Bipod Accessory Rail
Gunsmith ZG Customs

1/8 MOA with Berger 168 gr VLD Hunting over 60.0gr H4831sc WLRM primers 0.005 off lands @ 2940 fps of pure thunder

This is my rescue orphan. Pretty much all custom, mostly by me. 30-06 03A3 modified action Timney 2 lb trigger. Custom Fajen stock. Vortex 6-20x44 in a S&G mount.
Total cost on this rifle is about $600. Last outing I had it shooting a 100 yd group that looked like the one above. I was shooting 55 Gr 4350 &168 VLD. Scope mount worked loose while shooting, had to make a repair and I haven't had it out to shoot again since.

Ok I'll play.
Action: Remington C-Series 700 Short Action. Left Hand
6.5 Creedmoor
Barrel: Hart #2 Stainless 24" 1-8 twist
Stock: McMillian Remington classic ADL 13.5" LOP standard fill 50/50 Black and Orange
Bolt: TI Fluted by Karl Kampfeld
Cerekote work by Eddie Fosaugh.
Swarovski Z3 4x12x50 BT
Bare gun weighs 6.5lbs
Shoots Custom load 143grain Hornady ELD-X. Sub 1/2" MOA@100yrds
Texas Sticker from Buccee's........ Can you say " God Bless Texas"

Hey Roland, I think you have been had....They put your bolt on the wrong side....

Horizon Defiant action with base
28 Nosler
Benchmark 1/8 twist 28 inch barrel JP Comp
HS Precsion DM
Iota Stock
Iota Rings
Timney 2 Stage trigger
All work by Horizon Firearms



First 9 shots with various loads/bullets

Only picture I could find on my phone.
Savage long action
26" Douglas 257wby heavy sporter 1-10
Boyds laminate stock.
Wby brass 73grs imr 7828 with 100 gr. Matchking.

DStroud, what kind of velocity are you getting out of that 183 Sierra?

The 183gr was 3184fps
I went with the 195gr running 3160fps

OMG

I'm going to do this with my .308. Lovely little rifle!

.

I would really love to update this thread with my first "custom rifle". It is taking a little longer than I was anticipating. I'll post it up when it's complete.

risen from the dead one upper thread

Idontknowhymyscreennamehadtobethislong was on to something here. Great bump patty

I always enjoy these threads. Hopefully here in a couple weeks I'll get to post a new rifle. Nothing fancy or cool like pretty much all here - just a pretty typical AR-15.

Everyone needs at least one 223ai. Little dude hits way above its weight class running an 80gr bullet.

Surgeon 591 dlc coated
MacMillan a3-5
Schmidt scope in a hawkins 1 piece mount.

Alamo Precision Rifles Ranger
.308 Winchester
Defiance Tenacity Action
Muller Sendero Contour barrel, 26 inch, 1-10 twist, straight flutes, threaded muzzle
AG Composites Gladius Heavy Fill, color is called "Sage Brush"
Triggertech Primary 2.5 pounds
Hawkins Precision DBM
Scope will be 4-14x50 Nightforce SHV F1 FFP Mil/Mil
APR 20 MOA base, Badger Ordnance Rings
Side flush mount sling swivels
Gunsmith is Alamo Precision Rifles, North Richland Hills, Texas
Handloaded 168 Hornady Amax, H4895, Lapua Brass, CCI BR-2, 2800 fps in factory Remington 700V .308 with 26 inch barrel. I still have to do the load workup on this one.
46 inches long, 11.5 pounds

Ordered the rifle 03/09/21, called me said it was ready exactly 6 months later 09/09/21, picked it up 09/11/21 this past Saturday Morning. My first custom rifle. I have no idea why the photos are upside down.