Trued Remington 700 action .300 win mag
ptg bottom metal
rock creek 1:10 twist rem varmint contour barrel
McMillan A-3 sporter stock 50% olive 25%black 25%light tan
LRI brake
Straight fluted barrel
spiral fluted bolt
badger bolt knob
atlas bipod
badger bipod rail
jewell trigger set at 8oz
TPS rail
Nightforce lightweight rings
Nightfore NXS scope 5.5-22x50

Fellas, this is the clear example why it would be a serious error for a country to even consider invading the U.S.
Spot on

mod70 action or variant
257 wby
zeiss

100 yards 1347 ft/lbs.
200 yards 1269 ft/lbs. -4.9 Mils
300 yards 1201 ft/lbs -10.1 Mils

Still pretty stout even at 300 yards!

One of my favorites for a pure hunting rifle...
7-08
Remington Ti action
GreTan firing pin assembly
Broughton #3, 1:9, 22"
McM mountain rifle Edge fill, ADL bottom.
Rem trigger tuned up 2.5 lb
Talley lightweight lows
Zeiss Diavari 2.5-10x42 #8 with turret conversion/Kenton knob
Weighs 7lbs 11oz as it sits
Built by American Precision Arms
Shoots the 140Abond and 120TTSX under half inch at 100.

I am having built a Tikka via Chad with the following specs:

Tikka Stainless Steel Action
Bartlein Heavy Target 24"
Chambered in 260 Rem
Manners T4 Stock in Desert Sage Camo
Tikka Trigger Tuned
EGW 20 MOA Picitiny
Seekins 30mm Rings
Vortex PST 6-24x50 FFP Mil/Mil

This will be my first ever long range gun and can't wait for it's completion and begin working up loads.

^^Awesome combination, Fitz^^

Thanks, Jason. This is the rifle I want to use in your training class. I have all the parts except for the finished barreled action. I will let you know when I get it and get a load worked up.

I'm ready when you are. That rifle will have zero trouble on the range. You'll leave thinking a 3-400 yard hunting shot is no biggie.

Caliber
- .450 Marlin
Make and type of action?
- Savage SS Short action, RH (Model 16)
Barrel maker, contour, length of barrel, twist rate, style of flutes?
- Apache Gun Works, Magnum,24",1/10, No Flutes.
Stock maker, style, color?
- Hogue, Rubber covered with aluminum bedding block, Green
Trigger maker and weight?
- Savage Accutrigger
Bottom metal or magazines?
- Bottom Metal
Maker and size of scope?
- Leupold 1.5-5
Maker of rings and bases?
- Leupold
Other accessories?
- Possible muzzle brake
Gunsmith (optional)
- Me
Bullet Recipe ?
- Hornady LeverEvolution rounds
Total weight and length of gun
- Nine pounds, length unknown.

Keep the customs coming

Yes master....



300WSM
Defiance Rebel XM action
Defiance XM bottom metal
Bartlein #3 fluted 1:10 crowned at 24.5"
Vais micro brake
Titanium ceracote with the bolt body coated in microslick
Jewel trigger
McM Hunter edge fill, 1/2" decelerator, tan with green specs
Talley LWT lows
March-F 3-24x42
Built by GAP
Weighs 8lb12oz empty.
190vld and H4831SC is the combo I am working with now.

Another pic with the LRHS. 9lbs with that scope.

223
Remington Action
Badger M4 bottom
Rock M40, 1:8 at 22"
Rem trigger
McM A5 GAP camo standard fill
Badger rail, Warne Tac rings
Nightforce 3-15 MLR
Built by GAP
Weight 13lbs+/-

Dang RHutch, I am up for adoption if you are looking for a slightly older kid...just throwing it out there!

Yes, RHutch has won this thread.


I need to contribute more rifles.

He'll still have me beat, though.

I sold that 223. Was a pig. Was one of my first forays into what I thought I needed in a rifle.
I will never go heavier than a Rem Varmint contour and in reality, probably stick with a Brux 5. I got tired of heavy rifles with truck axle barrels.
My 260 is my favorite all-round pattern in weight, length and balance, but it is not my favorite rifle.
The tan 300 is almost perfection and is the pattern my next will be built off off. Similar to BIL's rifle in post #2.

Specs:
Remington 700 fully blueprinted, J-Lack shroud replaced
Brux #3 10 twist stainless barrel finished at 24"
McMillan Remington Mountain rifle with DBM
All metal in black cerakote
I put on a Leica 4.5-14 in talley's
I had it throated for 115 VLD's
Built by Aaron Roberts at Roberts Precision in Spring

Surely there are new additions to contribute to this thread.....

I'll play...

-7mm WSM
-Trued Remington 700
-Brux #5, 24", 1:8 twist, I think the fluting is called interrupted?
-Manners MCS-EH4- carbon fiber, Elite Moss, w/ MCS-DBM System
-Timney flat trigger (not in pic)
-NF ATACR 5-25X56 F1 MIL-R
-NF 34mm Rings and NF 20 moa base
-SilencerCo Harvester
-Berger 180gr VLD, R22, & Fed 210
-Cant remember weight off the top of my head... ~12 lbs with out suppressor and mag if I remember correctly.

I'll play.

Interarms Long action - trued
22" Pac-nor barrel
358 Win
B&C stock
Talley LW rings and bases
near 20 year old Leica 1.75-6 with #4 reticle
Cerakoted in school colors
3 shot groups @ 100 under/near .5"







Took THIS rifle and sent the barreled action off to Pac-nor to put on a 24" 6.5x55 Swede. Have a nice wood stock for it to go in when it gets back, sometime in August. Minox scope to go on top. vvvv

Dont have pics of my next one yet as its still in the shop but Ill through out the specs for it

338 lapua improved
defiance xl action with 60 MOA base
bartlein 32" 1-9 twist with 5r rifling custom contour fluted, not sure on brake yet
manner mcs-ta with the elite fill
single feed
jewel trigger
night force atacr 5-25x56 moar-t
not sure on rings
300 bergers and lapua brass, not sure on powder yet or primers (most likely fed 215m)
and maybe a 338 can, havent decided on that one yet

Caliber 300 win mag
Make and type of action Remington 700 blueprinted
Barrel maker, contour, length of barrel, twist rate, style of flutes? Benchmark, fluted, 1 in April
Stock maker, style, color? Manners eh 1 dipped in kryptek
Trigger maker and weight? Timney
Bottom metal or magazines? Hs precision magazine
Maker and size of scope? Bushnell ers
Maker of rings and bases? Horizon rings with larue base
Other accessories? Bungee type strap
Gunsmith (optional) horizon
Bullet Recipe ? Imr 7797 with a 190 ab lr at about 3050
Total weight and length of gun- not sure but wish I would have got a folding stock for flying

Lefty Tikka action
1:8 twist X caliber 243 24 inch barrel
Tikka trigger w Yodave spring installed
Manners t 4 stock
CDI bottom metal
Burris XTR ii 4-20x50
Maybe someday

22 Creedmoor
Horizon Stiller LH action
Benchmark 1/8 twist 24in
HS Precision DM bottom metal
Holland TH stock custom painting by Horizon Firearms
Talley 20 MOA base/Talley Rings
Timney trigger
Cerakote TexasTea

The wood cheek piece is a nice touch!