Forums46
Topics538,092
Posts9,732,899
Members87,065
|
Most Online25,604 Feb 12th, 2024
|
|
|
Tube bender
#8981591
01/03/24 03:50 PM
|
Joined: Jan 2009
Posts: 729
Sidebuster
OP
Tracker
|
OP
Tracker
Joined: Jan 2009
Posts: 729 |
Does anyone know of an inexpensive square tube bender to buy? Harbor freight has an inexpensive one but comes with round dies. I want to bend deer feeder legs to go on barrel.
|
|
|
Re: Tube bender
[Re: Sidebuster]
#8981642
01/03/24 05:21 PM
|
Joined: Jan 2013
Posts: 1,021
Kevin_M
Pro Tracker
|
Pro Tracker
Joined: Jan 2013
Posts: 1,021 |
Your best bet is to cut one or some small "v" notches in the tubing and bend then weld it. Determining where and how big of a notch takes some measuring and math but not too tough.
|
|
|
Re: Tube bender
[Re: Sidebuster]
#8981756
01/03/24 09:35 PM
|
Joined: Oct 2013
Posts: 5,929
Ol Thumper
THF Trophy Hunter
|
THF Trophy Hunter
Joined: Oct 2013
Posts: 5,929 |
No such thing as a cheap square tubing bender that I’ve ever ran across but just cut the legs at 11 degrees, flip them over and weld together at 22 degrees and presto problem solved.
|
|
|
Re: Tube bender
[Re: Sidebuster]
#8981857
01/04/24 12:12 AM
|
Joined: Apr 2011
Posts: 29,038
Western
THF Celebrity
|
THF Celebrity
Joined: Apr 2011
Posts: 29,038 |
If at first you dont succeed, then skydiving is not for you..
"Don't trust everything you read on the Internet"- Abraham Lincoln Dennis
|
|
|
Re: Tube bender
[Re: Sidebuster]
#8983002
01/06/24 02:57 PM
|
Joined: Aug 2009
Posts: 22,716
BigPig
THF Celebrity
|
THF Celebrity
Joined: Aug 2009
Posts: 22,716 |
Just know that you’ll never keep the sides from caving in unless you pack the tube with sand. But it’s easier and cheaper to just notch and weld them
|
|
|
Re: Tube bender
[Re: BigPig]
#8983473
01/07/24 04:21 PM
|
Joined: Dec 2008
Posts: 41,176
J.G.
THF Celebrity
|
THF Celebrity
Joined: Dec 2008
Posts: 41,176 |
No such thing as a cheap square tubing bender that I’ve ever ran across but just cut the legs at 11 degrees, flip them over and weld together at 22 degrees and presto problem solved. Just know that you’ll never keep the sides from caving in unless you pack the tube with sand. But it’s easier and cheaper to just notch and weld them ^^Yup
800 Yard Steel Range Precision Rifle Instruction Memberships and Classes Available
|
|
|
Re: Tube bender
[Re: J.G.]
#8983628
01/07/24 10:38 PM
|
Joined: Feb 2013
Posts: 20
Royce
Light Foot
|
Light Foot
Joined: Feb 2013
Posts: 20 |
What size tubing you want to bend
|
|
|
Re: Tube bender
[Re: Royce]
#8983740
01/08/24 02:15 AM
|
Joined: Jan 2009
Posts: 729
Sidebuster
OP
Tracker
|
OP
Tracker
Joined: Jan 2009
Posts: 729 |
What size tubing you want to bend 1 1/2 inch. Most deer feeder legs you buy for barrels are 3/4 or 1 inch.
|
|
|
Re: Tube bender
[Re: Sidebuster]
#8983743
01/08/24 02:26 AM
|
Joined: Jul 2014
Posts: 231
Peepaw on Fork
Woodsman
|
Woodsman
Joined: Jul 2014
Posts: 231 |
I bent mine on a straightening press. Just used a pin off the tractor where I wanted the pin. Helps if you have an angle finder to keep them all the same
|
|
|
Re: Tube bender
[Re: Sidebuster]
#8983903
01/08/24 02:58 PM
|
Joined: Feb 2008
Posts: 1,527
jimbob
Pro Tracker
|
Pro Tracker
Joined: Feb 2008
Posts: 1,527 |
I just heated with torch and bent. 1.5" sq tube. Worked perfectly
|
|
|
Re: Tube bender
[Re: Sidebuster]
#9002126
02/08/24 07:38 PM
|
Joined: Oct 2004
Posts: 239
PROLINE19
Woodsman
|
Woodsman
Joined: Oct 2004
Posts: 239 |
i used to bend them between trailer hitch and bumper may need cheated pipe. not tight bend but worked in the field.
|
|
|
Moderated by bigbob_ftw, CCBIRDDOGMAN, Chickenman, Derek, DeRico, Duck_Hunter, hetman, jeh7mmmag, JustWingem, kmon11, kry226, kwrhuntinglab, Payne, pertnear, rifleman, Superduty, txcornhusker
|