You are at the mercy of your comprehension.

Hint.............

Find what pressure? Max until bolt gets tight or brass is damaged? I don't get it can you explain your logic in detail?

"Pressure" is factored in a multitude of ways and the Astute always savvy. Velocity is a pressure indicator,in and of itself. Few savvy something as simplistic,as to how or what controls headspace. Brass can get damaged and bolts can get tight,due headspace alone,at rather sedate operating pressures. Read that again. Hint.

In the above cited Krunchentickers,it is rather easy to Smooch a Hornie 105 HPBT(one can whistle other projectiles with better BC's,but the Hornie HPBT travels outta mags and up feedramps,with iron resolve). 2930fps is a nice place to be,due the mechanics of said platforms. ES/SD is trite,feed/function stalwart and the terminal effects a given,in multiple zipcodes.

Hint..............

Now as Krunchentickers go,not all things is equal in regards to COAL. As plainly cited prior,ASC STEALS the show,both in robustitude and latitude. Hint.

They'll happily digest a 2.825" COAL,which is greater than that requisite,to Smooch the above in the cited throats. Hint.



Not all mags is equal.



Hint.................

Manufacturers seldom get things right,regarding that which matters MOST...twist/throating/COAL confines.

Hence Plug & Plays.




Hint...............

AICS being a great COAL step,in a DBM turn bolt.



Especially when losing the binder.




Hint..................

Welcome, Larry. Musta been booted off another forum. Wonder how long you will last on this one....

Always a treat to be regaled with a Whiner's Welcome.

Say sumptin' 6mm.

Dare ya'.

Hint.................

ZZZZZZZZZZZZZZZZZ.....

bye, bye, little man

Oh my...extra scoops of Imagination and Pretend for you today? Congratulations?!?

Very GOOD call,to refrain any/all things The Rifle and Whine instead.

Hint..............

removed content for rules violation

7. Foul language - the are a few colorful words we occasionally let slide, but their overuse will result in a warning. There are a few that never need to be used – we don’t need to mention them. Foul language makes the THF look trashy. When writing, it is very easy to express yourself without cursing. Use **** if you need to. Sponsors make this site possible and it is much easier to get them interested if the site is a little cleaner than your average Internet forum.
8. We promote a friendly atmosphere for hunters to exchange ideas. Differences of opinions are welcome and are an important part of this format. We do not, however, tolerate those that try to start an argument with every post. If you are looking to agitate people, simply to get a response or if you are a troller, this is not the place for you.grin)

Is that Larry from The Shooter's Forum? First time I seen some knucklehead trolling posts on this site. This thread has gotten off topic from all his crap and trolling on other topics on this site.

Hurt Feelers Report!

Never been tough to cypher,who shoots and who don't.

Hint...............

What scopes are you running, Busheler?

Oh...I've a "few" scopes,on a "few" rifles.(grin)

Let's do it this way:



Top to bottom:

S/A 700 based 270,wearing a Shilen 2oz trigger,MTU contoured Bartlein 1-7.75" at 19",heavy filled McMillan A5 adjustable comb/butt(hate 'em) and 12x MQ. !05 Hornie HPBT Smoochjing ala MDT poly 10-rounders(AICS poly 10rd 223 mags SUCK).

A2 stocked 6 Grendel 1-8" ARP 20" Rifle Gas. CMC Flatty single stage,105 Hornie HPBT Smooches ala ASC 10-rounders

S/A 700 based 6BR no-turn 1-8" Criterion from James at NSS. Started at 28" and I chopped it back,in increments for R&D(less regret). PT&G DBM Oberndorf release,AICS bindered mags,wearing Primal BR guts(Skookum). S/S 3-15x MQ SFP...pinned to double subtension,so reticle jives erector. They're junk,in both FFP and SFP. Hint.

S/A 700 based 6 Kreedmire 1-7" from James,VSS-esque at 24". 10x MO/MO and though better than most...MO/MO's get cluttered easily and are tough to discern on movers,given their increments and stadia thickness in conjunction. 108 Hornie ELD Smooches,ala AICS bindered mags. Hint.

'10 Krunchenticker wearing 1-8" BHW 243 SALAMI at 20". Slash HEAVY buffer/spring. 105 Hornie HPBT Smooches ala ASC mags and 10x MQ in horn rings(31 Mils remaining on erector,after 225yd zero. It is a MONSTER. Hint.

S/A 700 based 243Win AI,PN 3-grooved 1-8" and 105 A-Max Smooches well inside OEM ADL mag constraints. 6x Mo/Mo.

S/A 700 based 6-284,Brux 1-8" and 105 Hornie HPBT Smooches within AM binderless steel 10's. Reupold MK4 M1 3.5-10x Duprex,in a Marty doubled-lugged 30MOA rail.

Montucky 6-06,wearing a Brux 1-8" contour dupe and reduced shoulder shank length. 6x MOA/Mil.

MOA/Mil is the poorest design,but I'm MOA Fluent and am at ease in sliding wind in Mils on the reticle. Beaver Dope in the ocular denotes both come-ups and windage in Mils...as a 105 Hornie HPBT at 3400fps,really don't burn much in the way of subtention,with a 250yd zero.

Beaver Dope on said parcel...pre-paint.



Never been tough to cypher,who shoots and who don't..................(grin)





Ooopsie...I had a "bad" picture!

Lemme recap.(grin)







My bad.

I'm always busy with results and stuff...............

^^He gone

Yup. Hope he enjoyed his fame for 2 days.

Actually only about 35 hours.

Enough on the He gone, back to topic.



6X47 Lapua sounds interesting. as well. simple neck down for cases.

I'd think an ES below 10, reckon?

That's what I am thinking. Spec the chamber for the thicker necks from using the 6.5 brass necked down so neck turning most likely not required.

JJH deleted for some reason, but I'll respond anyway.

X47 brass is probably LaPua = highest quality.

X47 brass is a small rifle primer.

Those two facts lead a guy, that knows what he is doing, toward an extremely consistent shooting load. Which means an ES below 10.

Not that I’m surprised, or disappointed. But how do you know that?

Agreed.