Couple questions. Just picked up a used B&C medalist tactical stock. Love the stock, but its got 2 small holes on the forend. I guess it got dropped, both are about the size of a pencil eraser. I'd like to patch them. I've use bondo before to do some stock customization, but wasn't sure if there might be a bitter option. I'll fill the hole first so I don't have to pack it with so much bondo.
Also, when they did the inletting for the bottom metal, it looks like they did it with a chisel. It's rough. But the bottom metal fits snug, and the magazine feeds fine. I just want to fill the spaces in, and clean it up. Idk how I should do that. I'll paint the stock after I fix the issues, so that's no big deal. I can post pictures, but basically all the way around the bottom metal, there is a 1/16 to a little less than 1/4" gap between the metal and the stock.
I think it's fixable, and I got a stupid good deal on the stock mag and bottom metal,so its worth it to spend some time and money to fix it.
The very atmosphere of firearms anywhere and everywhere restrains evil interference. -George Washington