Forums46
Topics538,024
Posts9,731,992
Members87,055
|
Most Online25,604 Feb 12th, 2024
|
|
|
Factory Ammunition- What's really on the inside!!??
#5996801
10/27/15 05:53 PM
|
Joined: Sep 2009
Posts: 18,954
ChadTRG42
OP
THF Celebrity
|
OP
THF Celebrity
Joined: Sep 2009
Posts: 18,954 |
As a custom ammunition mfg, I do a lot of custom load developments for rifles. Sometimes I get calls from hunters/shooters that have tried multiple factory ammunition brands/types to get their rifles dialed in. Sometimes, no matter what they feed it, it's not good enough. They want something better. A few weeks ago I got a similar call for 2 rifles. One a 7 STW and one a 257 Weatherby. The factory ammunition was very inconsistent and did not shoot well in either of these custom rifles. The customer asked me to pull the factory bullets, and use the high end brass to load for my ammo. No problem! Whenever I pull bullets on factory ammunition, I weigh their powder charges to see how (in)consistent it is. I am using a high end Sartorius digital scale accurate to .02 grains. Here is what I found! 7 STW- 140 grain Accubond factory ammo. I pulled 28 rounds and weighed the powder charges. The average powder charge on 28 rounds was 80.08 grains. The high was 80.52 grains and the low was 79.74 grains. That's a .78 grain extreme spread. 257 Wby 110 grain AB factory ammo. I pulled 25 rounds and weighed each powder charge. The average was 66.56 grains. The high was 67.24 and the low was 66.08. That's a 1.16 grain extreme spread on 25 rounds! The 7 STW had a .78 grain powder extreme spread and the 257 Wby had a large 1.16 grain powder extreme spread. So, what does this high extreme spread mean? When loading precision ammunition to tune the ammunition to the rifle, you often load your test loads up in about .3 grain increments. For example, Load A may be 44.0 grains, load B may be 44.3 grains, Load C may be 44.6, Load D 44.9, and Load E 45.2. These 5 test loads have a 1.2 grain spread from start to finish. Within these A-E test loads, you can find a sweet spot where the rifle likes to shoot. Generally, a .3 grain increase in powder charge will increase the bullet velocity about 25-30 fps. So a full grain of powder will generally increase your bullet velocity about 90-100 fps. This .3 grain increment is small enough to see where the rifle wants to shoot well to find the sweet spot. If the factory 7 STW ammunition on 25+ rounds already has a .78 and the factory 257 Wby ammo has a 1.16 grain spread, that will not allow the rifle to stay within a given accuracy node. This will open up the groups and cause inconsistent shots. Plus, the .78 grain spread on the STW ammo will cause about 65-80 fps spread. The 1.16 grain powder difference on the 257 Wby ammo will cause about 96-120 fps spread. That's a lot!!! Also, what I noticed on the 257 Wby ammo is a lot of charges were on the high side and on the low side. The average charge was 66.56 grains, but most of the powder charges were closer to the max and the min charges, not the average. There were not many close to the average charge. Also, when I have done these in the past, the smaller the opening (diameter of the round), the worse (or higher) the spread is on the powder charges. The 257 Wby held true to this also. If you look at these 2 targets below, I am going up in .3 grain increments in powder charge with these test loads. In the first target, you can see a noticeable decrease in group size with Load C. This was a 1.032" group shot at 300 yards. The second target is a 243 Win. You can see the top right group about 1" at 300 yards, also. I like using these test targets, because it shows a perfect load work up with the normal signs of what the rifle likes when shooting. You can see some openness, then the groups start to string a little, then you find your sweet spot and the group tightens up. This sweet spot is what you load to. When your scales are accurate to .02 grains, that's accurate to 1 kernel of powder. When the powder charges have a difference of .78 and 1.16 grains, this alone will open up your groups and make for inconsistent ammo. When you pull the bullets and weigh the powder charges, you can see what's really on the inside!!!!
|
|
|
Re: Factory Ammunition- What's really on the inside!!??
[Re: ChadTRG42]
#5996827
10/27/15 06:05 PM
|
Joined: Jul 2013
Posts: 2,778
Gone to Texas
Veteran Tracker
|
Veteran Tracker
Joined: Jul 2013
Posts: 2,778 |
Wow, great write up Chad!
Thanks for sharing.
|
|
|
Re: Factory Ammunition- What's really on the inside!!??
[Re: ChadTRG42]
#5996865
10/27/15 06:22 PM
|
Joined: Dec 2009
Posts: 5,455
Big Fitz
THF Trophy Hunter
|
THF Trophy Hunter
Joined: Dec 2009
Posts: 5,455 |
I suspected there would be a greater variation than hand reloaders can control but that is far beyond what I would have thought. Thanks for the info, Chad.
I was wrong...on anything technical. Fitz............. is right, ya know............
|
|
|
Re: Factory Ammunition- What's really on the inside!!??
[Re: ChadTRG42]
#5996871
10/27/15 06:24 PM
|
Joined: Jul 2012
Posts: 15,710
603Country
THF Celebrity
|
THF Celebrity
Joined: Jul 2012
Posts: 15,710 |
Thanks for the insight. I had no idea that factory ammo was that inconsistent. I wonder if the 'good stuff' like Federal premium or Black Hills or Nosler Premium has anywhere near that much powder variance.
Not my monkeys, not my circus...
|
|
|
Re: Factory Ammunition- What's really on the inside!!??
[Re: ChadTRG42]
#5996876
10/27/15 06:27 PM
|
Joined: Sep 2009
Posts: 18,954
ChadTRG42
OP
THF Celebrity
|
OP
THF Celebrity
Joined: Sep 2009
Posts: 18,954 |
One of the companies you listed above is this ammo!!!
|
|
|
Re: Factory Ammunition- What's really on the inside!!??
[Re: ChadTRG42]
#5997007
10/27/15 07:42 PM
|
Joined: Nov 2007
Posts: 5,518
NewJeep
THF Trophy Hunter
|
THF Trophy Hunter
Joined: Nov 2007
Posts: 5,518 |
I am going to go out on a limb and say it was Nosler.
Live to hunt, forced to work!
|
|
|
Re: Factory Ammunition- What's really on the inside!!??
[Re: ChadTRG42]
#5997045
10/27/15 08:01 PM
|
Joined: Apr 2007
Posts: 60,480
BOBO the Clown
kind of a big deal
|
kind of a big deal
Joined: Apr 2007
Posts: 60,480 |
I just want to add that first target is a factory rifle and the owner is a really cool dude.
Chad's ammo with out a doubt extremely consistent
|
|
|
Re: Factory Ammunition- What's really on the inside!!??
[Re: ChadTRG42]
#5997257
10/27/15 09:54 PM
|
Joined: Aug 2006
Posts: 11,657
colt45-90
Texas colt45
|
Texas colt45
Joined: Aug 2006
Posts: 11,657 |
hold on Newt, we got a runaway
|
|
|
Re: Factory Ammunition- What's really on the inside!!??
[Re: ChadTRG42]
#5997403
10/27/15 10:52 PM
|
Joined: Oct 2013
Posts: 757
fast88
Tracker
|
Tracker
Joined: Oct 2013
Posts: 757 |
|
|
|
Re: Factory Ammunition- What's really on the inside!!??
[Re: ChadTRG42]
#5997463
10/27/15 11:22 PM
|
Joined: Jan 2011
Posts: 2,273
boonee
Veteran Tracker
|
Veteran Tracker
Joined: Jan 2011
Posts: 2,273 |
Chad, that is what I have found. I pulled down some Win." W-mart" 30-30, I found out of the 20 projectiles only 5 were 150gr most were lighter and 2 were 154. Powder weight was all over with only 5 were the same.
Avenger Firearms 214-577-5818 avengerfirearms@gmail.com
Lifetime NRA member
|
|
|
Re: Factory Ammunition- What's really on the inside!!??
[Re: ChadTRG42]
#5997533
10/27/15 11:59 PM
|
Joined: Aug 2005
Posts: 31,953
txtrophy85
THF Celebrity
|
THF Celebrity
Joined: Aug 2005
Posts: 31,953 |
Great study!
Whst velocity are you getting with your loads with the .257 wby 110 grain bullet?
For it is not the quarry that we truly seek, but the adventure.
|
|
|
Re: Factory Ammunition- What's really on the inside!!??
[Re: ChadTRG42]
#5997564
10/28/15 12:16 AM
|
Joined: Nov 2007
Posts: 9,523
RiverRider
THF Trophy Hunter
|
THF Trophy Hunter
Joined: Nov 2007
Posts: 9,523 |
You gotta wonder about all those articles that have been written about this rifle, or that, where they publish the results using a number of different factory loads. It's been a long time since I read a gun rag, and the way my memory performs as I get older I might not recall in a week...but sometimes factory ammo performs very well indeed. But I suspect that it might be learned that those particular cartridges were loaded with spherical powders if I were to dig up a bunch of these articles. It seems like a safe bet, anyway. I've never been a believer in trying to meter coarse extruded powders.
"Arguing with you always makes me thirsty." -Augustus McRae
|
|
|
Re: Factory Ammunition- What's really on the inside!!??
[Re: ChadTRG42]
#5997789
10/28/15 02:17 AM
|
Joined: Sep 2009
Posts: 18,954
ChadTRG42
OP
THF Celebrity
|
OP
THF Celebrity
Joined: Sep 2009
Posts: 18,954 |
RR, you got it right. I don't know why they use the extruded powders for metering by volume. You can not get a consistent weight doing that. There are plenty of slower burning spherical powders that will work well.
|
|
|
Re: Factory Ammunition- What's really on the inside!!??
[Re: txtrophy85]
#5997791
10/28/15 02:17 AM
|
Joined: Sep 2009
Posts: 18,954
ChadTRG42
OP
THF Celebrity
|
OP
THF Celebrity
Joined: Sep 2009
Posts: 18,954 |
Great study!
Whst velocity are you getting with your loads with the .257 wby 110 grain bullet? The top target is with a 257 Wby shooting the 115 grain Berger. The 110 will be moving a little faster, about 30-50 fps maybe.
|
|
|
Re: Factory Ammunition- What's really on the inside!!??
[Re: ChadTRG42]
#5997835
10/28/15 02:33 AM
|
Joined: Sep 2006
Posts: 32,506
kmon11
junior
|
junior
Joined: Sep 2006
Posts: 32,506 |
Good write up Chad, agree with you and RR about extruded powders.
Something else it may be a different powder lot to lot with factory ammo.
lf the saying "Liar, Liar your pants on fire" were true Mainstream news might be fun to watch
|
|
|
Re: Factory Ammunition- What's really on the inside!!??
[Re: ChadTRG42]
#5997846
10/28/15 02:39 AM
|
Joined: Sep 2009
Posts: 18,954
ChadTRG42
OP
THF Celebrity
|
OP
THF Celebrity
Joined: Sep 2009
Posts: 18,954 |
|
|
|
Re: Factory Ammunition- What's really on the inside!!??
[Re: ChadTRG42]
#5997960
10/28/15 03:16 AM
|
Joined: Dec 2013
Posts: 6,925
GasGuzzler
THF Trophy Hunter
|
THF Trophy Hunter
Joined: Dec 2013
Posts: 6,925 |
I've only compared pulled bullets since the powder (mix) is unknown and therefore tough to decide what all the other variables mean. I can't ID industrial powder or primers. Who knows their primers? Yeah, someone does. A friend bought a new Ruger Blackhawk .357/9mm convertible (not easy to get any more), waited months during the shortage. Finally came in. Wouldn't shoot for crap. Ended up selling it off without using any 9mm at all or changing ammo (either mine or another store bought). Since he had no other .357 he gave me the left-overs. I wanted the brass. I pulled them and found these super hard cast goofy kinda pointed hollow base for some unknown reason poor excuses for projectiles. A monkey could crap a better bullet. They're in my "To Melt" area. I wanted the brass.
Pass the gravy.
|
|
|
Re: Factory Ammunition- What's really on the inside!!??
[Re: ChadTRG42]
#5998321
10/28/15 01:34 PM
|
Joined: Aug 2014
Posts: 1,816
Bigfoot
Pro Tracker
|
Pro Tracker
Joined: Aug 2014
Posts: 1,816 |
Great write up.
Now I know why I cant shoot straight!!
GO TRUMP!
|
|
|
Re: Factory Ammunition- What's really on the inside!!??
[Re: ChadTRG42]
#5998524
10/28/15 03:59 PM
|
Joined: Dec 2008
Posts: 41,173
J.G.
THF Celebrity
|
THF Celebrity
Joined: Dec 2008
Posts: 41,173 |
Good stuff Chad! We know there are some chamberings that just seem to shoot well, even on factory ammo. Two prime examples are the .308 Win and the 6.5 Creedmoor. They are very easy to load, but some guys just don't have the time or the space. Hornady has made some great 6.5 Creedmoor ammo and lately made some bad shooting ammo. Have you pulled that ammo apart? Seems the vast majority of .308's will shoot Federal Gold Metal Match well, some shoot it very small. Have you pulled apart FGGM before? Would you agree the likelyhood of a short action shooting factory ammo well is higher than a long action shooting factory ammo well?
800 Yard Steel Range Precision Rifle Instruction Memberships and Classes Available
|
|
|
Re: Factory Ammunition- What's really on the inside!!??
[Re: ChadTRG42]
#5998695
10/28/15 05:54 PM
|
Joined: May 2012
Posts: 8,384
nsmike
THF Trophy Hunter
|
THF Trophy Hunter
Joined: May 2012
Posts: 8,384 |
One thing is that the short action calibers 308 and 243 were both developed and originally loaded with ball powders. It would not be surprising to find that most manufacturers still use ball powders to load them. Alliant powder is owned by the same parent company as Federal Ammunition so I wouldn't be surprised to find they use spherical powders. Here's an interesting Wikipedia entry on ball powder https://en.wikipedia.org/wiki/Ball_propellant
for every stereotype there's a prototype don't be the prototype
|
|
|
Re: Factory Ammunition- What's really on the inside!!??
[Re: ChadTRG42]
#5999311
10/29/15 12:52 AM
|
Joined: Mar 2010
Posts: 1,352
crawdaddy
Pro Tracker
|
Pro Tracker
Joined: Mar 2010
Posts: 1,352 |
Great write up Chad. All the more reason why I roll my own!
NRA Life Member If you're not a member, you should be.
|
|
|
Re: Factory Ammunition- What's really on the inside!!??
[Re: ChadTRG42]
#6029632
11/15/15 12:13 AM
|
Joined: Nov 2013
Posts: 6,113
soooo
THF Trophy Hunter
|
THF Trophy Hunter
Joined: Nov 2013
Posts: 6,113 |
|
|
|
Re: Factory Ammunition- What's really on the inside!!??
[Re: soooo]
#6029665
11/15/15 12:38 AM
|
Joined: Apr 2010
Posts: 14,199
tth_40
THF Celebrity
|
THF Celebrity
Joined: Apr 2010
Posts: 14,199 |
Me too. This is why.
Never underestimate the power of stupid people in large numbers
|
|
|
Re: Factory Ammunition- What's really on the inside!!??
[Re: ChadTRG42]
#6030348
11/15/15 03:29 PM
|
Joined: Dec 2008
Posts: 22,630
Cast
THF Celebrity
|
THF Celebrity
Joined: Dec 2008
Posts: 22,630 |
Great info Chad and exactly how I load for my rifles.
Cast I have a short attention spa
|
|
|
Re: Factory Ammunition- What's really on the inside!!??
[Re: ChadTRG42]
#6030940
11/15/15 10:16 PM
|
Joined: Nov 2013
Posts: 1,102
Bbear
Pro Tracker
|
Pro Tracker
Joined: Nov 2013
Posts: 1,102 |
Well, when it seems that the major manufacturers appear to powder the cases using a shovel, Chad's report isn't all that unexpected. Thanks for proving that at least in this case, they hold to what I've experienced.
[IMG][/IMG]
Pay it forward - Kids are the future.
Rifles are similar to boats and young women...there's no end to how much money you can pour into them without making them any more useful.
|
|
|
Moderated by bigbob_ftw, CCBIRDDOGMAN, Chickenman, Derek, DeRico, Duck_Hunter, hetman, jeh7mmmag, JustWingem, kmon11, kry226, kwrhuntinglab, Payne, pertnear, rifleman, sig226fan (Rguns.com), Superduty, TreeBass, txcornhusker
|