Beretta A300 aftermarket choke

Looking to get an aftermarket choke for my A300. Primarily hunting ducks and crane. I’m looking to get a modified or light modified. Who you do recommend for my gun? Appreciate the recommendations!

I've got a carlson for my Maxus, but the PatternMaster Code Black Duck has my attention.

I've always had good luck with Trulock but Briley a close second.

Have a Carlson’s on one and patternamster on the other. They both work

Briley

Briley flush chokes are my go to. I also have some extended Trulock's that I like as well. For extended range with large shot, patternmaster is the best I've tried.

Muller by far, followed by Rob Roberts. The others mentioned are ok. For Crane, make sure you have a full choke, and a good one that is rated for steel 3" BB so you don't warp your barrel (yes it has happened). Some folks advocate you can get by with a lesser load and choke, but they are big birds and you don't want to be the guy wounding birds. Personally, I prefer to use a 3 1/2 for cranes and geese, but I don't think an A300 is rated for anything over a 3".

Also, I like Patternmaster ok but those are technically not constriction chokes, but rather wad stripping chokes, so don't buy one and try to shoot the old version of Blackcloud through it.

my son really likes the Cremator and hevishot/hevisteel

Got a Trulock SK2 from opticsplanet for $17 a while back. Haven't patterned steel shot, but it is very even with dove shells.

I have this same semi and run a kicks high flyer choke tube in modified - it works great, I've had it for about 5 years. Haven't been able to connect on any cranes but had it out in Stuggart during snow goose conservation season, it worked really well.