Posted By: Sarge3
Mounting scope to tripod - 12/13/19 04:09 AM
I have been searching for a adapter to convert a tripod screw base mount to fit the picatinny mount on my night vision scope. I have looked everywhere and nothing seems designed for this.
Posted By: BigPig
Re: Mounting scope to tripod - 12/13/19 04:18 AM
That’s going to take some work.
I can give you a list of parts to get it done, but it won’t be pretty.
Posted By: BigPig
Re: Mounting scope to tripod - 12/13/19 04:25 AM
First you will need a ball head, cheap is fine for just an optic.
https://www.amazon.com/Neewer-Profe...s=photo&sprefix=arca+swis&sr=1-3Then you will need this. It slides into the top of the ball head.
https://www.nightvisionoutfitters.c...isol-cretac-picatinny-arca-swiss-adapterLast, you will need something with Picatinny rails on at least two sides. One side clamps into the Cretac adapter, the other side your optic will clamp on.
https://www.deltateamtactical.com/Picatinny-Quad-Rail-Gas-Block-Barrel-Mount_p_3991.html
Posted By: BigPig
Re: Mounting scope to tripod - 12/13/19 05:10 AM
He’s still going to need a ball head if he doesn’t have one or he won’t be able to move the optic
Posted By: Sarge3
Re: Mounting scope to tripod - 12/14/19 01:58 AM
WP75169
Thank you.
That is exactly what I needed.
Looked for hours and couldn’t find it.
Posted By: Sarge3
Re: Mounting scope to tripod - 12/14/19 02:18 AM
What I am doing is........
I have a trigger stick tripod.
I want to mount a pvs 30 on it
I bought a adapter to swap the gun rest y to a camera shoe base.
Posted By: Sarge3
Re: Mounting scope to tripod - 12/14/19 02:19 AM
Sorry if I didn’t explain enough