HELP - Did I Break My Bushy?

I think I did something stupid today at the range.

My 6.5 is mounted with a Bushnell Elite Tactical 4-30x50 (30 mils total travel per website). I was playing around with some of Chad subsonic for the 6.5CM and marched out from 100-300 on steel.

I forgot that this rifle had a 0 MOA rail (and not a 20 MOA like my other rifles) and I thought that i had enough travel to dial up to 15 Mils of elevation. Whoops. When i try to dial back down to 0, the elev knob stops at about 4 mil and won't return to zero. Did i break the darn thing?

What do i do now?

Send it in. They were about a 2 week turn-around the last time I sent them one.

Thx bud

did the zero stop move? unlock and see if it dials down

Yep, that seems to have solved it. Thx.

Zero stop moved? That's not good.

I heard a few bad stories and never set the zero stop on mine.

I need to get it back to the range and Re-zero and check tracking. Will send it in if anything doesn’t check out.