AK Scope Mount

I have a Arsenal 107CR - with the side scope rail attachment

I am wanting to put a Trijicon Accupoint 1-4x24 on it.

I want to find the mount that gives me the best cheek weld

So far I have looked at the Arsenal brand and the MI brand with
Built in rings.

Somebody give me first hand experience

The main issue with AK mounts is getting one that will hold a zero. Check out the AK Files forum; the RS Regulate is the clear favorite. I have one on my WASR and like it. It gives you the ability to align the rail left/right, which is nice. It’s not as low as a railed top cover but is much sturdier. Also, the long rail gets my 1-6 scope far enough forward for good eye relief.
After that, focus on the cheek weld. I have a Magpul Zhukov stock with one of their cheek risers. You can also use a traditional riser or check out what Rob Ski from the AK Operators Union uses and sells. He has a YouTube channel and web site. Good luck

x2 on RS Regulate. Have one on a vepr, I can remove it and it will still hold zero.