Re: Bedding your rail to the action. - 12/03/1705:32 AM
It is interesting that guys will put on huge scope rings to hold enormous scopes with 6 or 8 screws each. And the whole massive contraption is held on the gun with 4 tiny screws.
Re: Bedding your rail to the action. - 12/28/1701:02 AM
There is only 1 way to know if you need to bed your rail or not, and that is to check if there is a gap between the action and base when only 1 side has screws in it. If there is a gap then bed your rail so you dont induce flex to the scope.