poly pipe

Looking on line for about 3000' of poly pipe. 3/4" Any ideas?
Thanks

If you're looking at making a single 3000' run and want any volume/pressure at the finish you may jump up to 2".

3/4" pipe loses 7.77 psi per 100' at 10 gpm
2" pipe loses .09 psi per 100' at 10 gpm

You would have to start around 80 psi at the meter to be happy with even 2"....considering you'll lose around 27 psi. Friction loss is not your friend.

Page 4
https://www.hunterindustries.com/sites/default/files/tech_friction_loss_charts.pdf

find your nearest coop and see if they have it in irrigation tubing.

go to home depot and get the name off the brands they sell and call the mfr and ask about a large roll.

1000' rolls

https://www.farmtek.com/farm/supplies/prod1;;pg110408_110741.html