Nice. Have you completed the build?
Didn't get it on tower, partners had something come up and couldn't make it, maybe next weekend. Did get it delivered to lease and new decking attached to tower for the floor so it's ready to go. Deerview windows were delivered last week so once I get it screwed together the windows will go in and I'll be done. It will go quick. Put up side wall, using self tapping #14 screws through bottom plate, through floor decking and into steel tower angle metal, one screw in the middle so you can pivot the wall as the front wall goes up. Same process on the front wall, one good wood screw wall to wall in the corner. That's the only hard part. Second side wall, screw to floor and into angle metal, attach the corner with a screw. Back wall, roof. Once in place, I go back with three heavy lag screws in each corner, and a total of three self tapping screws on each wall into frame of stand. The roof is a cap, lag screws from inside through top of wall, into frame of roof cap. Kinda like this one