Posted By: DuckKiller2010
Deprimer - 02/04/18 09:18 PM
What is your favorite deprimer tool?
Deprimer
Posted By: RiverRider
Re: Deprimer - 02/04/18 09:25 PM
Lee Universal.
Posted By: Eyesofahunter
Re: Deprimer - 02/04/18 10:18 PM
Lee, just did another 500 this weekend with it on top of the thousands before.
Posted By: Buzzsaw
Re: Deprimer - 02/04/18 10:49 PM
my sizing dies 
Posted By: Old_Town
Re: Deprimer - 02/06/18 03:31 AM
Lee
Posted By: Teal28
Re: Deprimer - 02/06/18 12:42 PM
I use the RCBS decapping die. Works great.
Posted By: TackDriver
Re: Deprimer - 02/06/18 03:04 PM
Lee
Posted By: garyrapp55
Re: Deprimer - 02/06/18 03:07 PM
I use my sizing die so I can bump the shoulder. Are you looking to decap and not size and why?
Posted By: GLC
Re: Deprimer - 02/06/18 03:21 PM
Lee
Posted By: J.G.
Re: Deprimer - 02/06/18 03:44 PM
Two RCBS universal dies, large and small. Lee can suck it.
Broke my last decapping pin a couple weeks ago, emailed RCBS, got a sack full of new ones in a few days, no questions asked.
Broke my last decapping pin a couple weeks ago, emailed RCBS, got a sack full of new ones in a few days, no questions asked.
Posted By: J.G.
Re: Deprimer - 02/06/18 03:46 PM
Originally Posted By: garyrapp55
I use my sizing die so I can bump the shoulder. Are you looking to decap and not size and why?
I do this on range pick up brass. That brass will go through the stainless tumbler with no primers installed. Therefore the primer pocket gets as clean as the rest of the brass.
Posted By: DuckKiller2010
Re: Deprimer - 02/06/18 06:14 PM
Originally Posted By: FiremanJG
Originally Posted By: garyrapp55
I use my sizing die so I can bump the shoulder. Are you looking to decap and not size and why?
I do this on range pick up brass. That brass will go through the stainless tumbler with no primers installed. Therefore the primer pocket gets as clean as the rest of the brass.
This
Posted By: garyrapp55
Re: Deprimer - 02/06/18 09:45 PM
Originally Posted By: FiremanJG
Originally Posted By: garyrapp55
I use my sizing die so I can bump the shoulder. Are you looking to decap and not size and why?
I do this on range pick up brass. That brass will go through the stainless tumbler with no primers installed. Therefore the primer pocket gets as clean as the rest of the brass.
Understood, this does not apply to me.