Texas Hunting Forum
Remington 700 trigger
Posted By: BassCat'99
Remington 700 trigger - 12/04/17 08:19 PM
I have heard enough people say "you can't work on a Remington trigger" Mine are the newer, less then 10 years old, X-mark pro. Is there any way to improve the trigger pull? I have six rifles that I can not afford $150.00 on each.
Posted By: ChadTRG42
Re: Remington 700 trigger - 12/04/17 08:27 PM
Yes, you can adjust them. You won't get them to a light weight bench trigger, but you can adjust it enough to make it a good trigger.
Posted By: BassCat'99
Re: Remington 700 trigger - 12/04/17 08:29 PM
I'll do some research and try on one, Thanks Chad.
Posted By: ChadTRG42
Re: Remington 700 trigger - 12/04/17 08:52 PM
I recently bought a Rem 700 ADL with the X mark trigger, and adjusted it down to about 2-3 lbs. It's not a Jewell trigger, but it will work.
Posted By: D-Day
Re: Remington 700 trigger - 12/04/17 09:57 PM
I have a Remington 700 ADL. I put a Timney trigger on it, and it's the best trigger I've every tried. I bought the "thin" version that Timney introduced a couple of years ago.
The XMarkPro should adjust fine, but the Timney is outstanding. I'm going to buy one for my Ruger American Predator rifle.
Best of luck.
Posted By: LFD2037
Re: Remington 700 trigger - 12/04/17 11:55 PM
Posted By: fouzman
Re: Remington 700 trigger - 12/05/17 12:56 AM
I convert all my 700's to Jewels. Maybe you could do one or two favorites/year? Adjust them until then
Posted By: tth_40
Re: Remington 700 trigger - 12/05/17 01:10 AM
I have 1 700 and 1 Model Seven left in the stable, both wear Timneys.
Posted By: rjd
Re: Remington 700 trigger - 12/05/17 05:14 AM
Running TriggerTech on mine. Used an adjusted model 700 trigger for years. Difference is night and day.
Posted By: HWY_MAN
Re: Remington 700 trigger - 12/05/17 11:57 AM
Remington's are the one trigger I've never really had a problem with, easy to adjust and as mentioned above (Not target grade but close enough for most)they'll work for 90% of most applications.
Posted By: ccoker
Re: Remington 700 trigger - 12/05/17 12:08 PM
I have an extra Timney Calvin Elite tuned to 2lbs I am not using...
Posted By: BassCat'99
Re: Remington 700 trigger - 12/05/17 12:41 PM
who else has tried the TriggerTech trigger?
Posted By: Ritter
Re: Remington 700 trigger - 12/06/17 02:17 AM
Remington triggers are pretty easy and straightfoward to adjust. There are only three screws; travel, weight and sear engagement. The one to be careful with is the sear engagement. If you go to far with it, the trigger can be a scary, sensitive hair trigger.
Watch a few videos online and decide for yourself if you are comfortable with adjusting it. If you do decide to adjust the trigger be sure to lock the screws down with a drop of blue locktite or even nail polish.
Posted By: supersixfour
Re: Remington 700 trigger - 12/06/17 03:19 PM
I've done erniethegunsmith spring on 3 different 700's. In each case it reduced the pull weight from 3/4 to 1lb off stock.
For the price it worked for me.
Posted By: DuckCoach1985
Re: Remington 700 trigger - 12/06/17 04:13 PM
I converted my 700 .223 ADL to BDL and adjusted the stock trigger. Really made a huge difference. Never shot a jewel or timney and I doubt it's even close, but man I love the results after adjusting it. PLEASE be very careful, as mentioned above, if you over-do it you can cause the sear to release with the safety on!
Posted By: redchevy
Re: Remington 700 trigger - 12/06/17 04:31 PM
Wonder how many accidental discharges are due to people jacking with their triggers.
Posted By: J.G.
Re: Remington 700 trigger - 12/06/17 05:56 PM
Wonder how many accidental discharges are due to people jacking with their triggers.
Lots.
Posted By: Sirrah243
Re: Remington 700 trigger - 12/06/17 06:33 PM
I install a Timney is all of my 700s'
Posted By: skinnerback
Re: Remington 700 trigger - 12/06/17 07:44 PM
Wonder how many accidental discharges are due to people jacking with their triggers.
Lots.
Yep. Then they hate on Remington.