Posted By: Buzzsaw
gun parts - 09/25/17 11:28 AM
looking for gas piston and gas seal for Remington 1100. Anywhere local I could buy these?
Posted By: Smokey Bear
Re: gun parts - 09/25/17 12:35 PM
Buzz, if you don't find it local, Midway USA is your friend. Gas Piston assembly for $19 & $6 for the O-ring. They will hit you for about $5 shipping but you should be up and running for $30.
Brownells
Maybe the angry old man gun shop over in Plano
Posted By: blackcoal
Re: gun parts - 09/26/17 03:39 AM
Agree, I would at least try Lee's.
Posted By: Buzzsaw
Re: gun parts - 09/26/17 11:37 AM
My 1100 project is coming along pretty good. I was able to get the piston and seal cleaned up pretty good and ordered a new "O" ring and a plug, the guy had a piece of dry cleaner hanger cardboard rod....jeez that's a new one on me, always seen the dowel rod. I'll pick up a new dowel rod at Academy.
I'll put it back together and see how it goes. Daughter is going dove hunting this weekend, so I'll patch it up.
I will then have the stock shortened and a soft pad installed by someone.
kinda fun doing this, I'm no gunsmith but its fun
Posted By: TX_LT230FH
Re: gun parts - 09/26/17 02:25 PM
I've use a #2 pencil before, but never a hanger rod.........