Anybody recently had one built? Trying to get a ballpark of what cost should be.
TIA

Buddy of mine paid 56,000 for a 30x40, 2 roll ups and a walk in door, spray foam and electrical included and slab. West of DFW.

Wood or steel frame?

It would be steel frame.

I am NOT affiliated with this company.

But, Wolf Steel Buildings is on my YouTube feed. I watch their videos. They give very specific pricing.

I cannot speak for their work. They are in Texas

Mine was finished the end of January here are the details.

Size 30x50' with 30x5' walkway in front.
I Beam Construction
3 insulated overhead doors.
1 3/0' man door
4 windows
Plumbing for sink & toilet
Electric & water ran to building site.
Foamed with 1" closed cell foam.
Ceiling painted to cover foam
Fully wired with 200 Amp service
Lighting
Gutters
Roadbase & rock driveway
2x4 framing for 30x14 mancave.
A/C & Heating in mancave.
4x8' wall covering throughout.

Total approx. 70K

I got a $45k quote 3 months ago for a 30 x 25. Pad, concrete, steel, spray foam, etc…hard pass at that price. (Parker County)

Pretty good price. I was quoted $75k for a 40x60 building with 25x40 overhang on the front, two roll ups, one walk through door, I-beam construction, standard insulation. I’d handle electric and plumbing.

I forgot the 25'x15' overhang. If it was something I could do I did it. You can see my entire process in the DIY Section, post is "Shop Build Underway."

50 x 70 with 25 x 50 overhang, 8 x 70Loft and staircase. Dirt work, slab, steel, electrical, insulation, four 12 x 14 OHD(2 are electric), 2 personnel doors, four 3x6 windows, rock around structure. $185k

6-month lead time..... 3-month build time.

Lookin like around $50/sq ft is what you can roughly bass it on

Should be able to do it for around 35 sq ft without doors or windows.

I was quoted $35k for a 30’X40’ using two shipping containers as the outside walls. This was with two roll up doors and one man door.

Just finished building mine, 64 x 40 pad with a 50 x 40 mueller premium kit. Concrete was $26k and kit was $24k, erection cost about 4-5k

In 2020 mine was about $75k for a 30x40x14 with 3 12x12 doors, 4 windows, 1 man door, 6 inch thick slab, 250tons of select fill, electrical, spray foam, paint, gutters all the way to the street, brick half walls, 150yards of stone for driveway.

I’d hate to think of what it cost today.