Forums46
Topics537,777
Posts9,729,029
Members87,042
|
Most Online25,604 Feb 12th, 2024
|
|
|
Clearing sapling trees
#8697596
09/28/22 03:45 PM
|
Joined: Jan 2013
Posts: 960
Gary Olson
OP
Tracker
|
OP
Tracker
Joined: Jan 2013
Posts: 960 |
I need suggestions on how to clear a field(s) of saplings. The previous owner didn't mow the field for 6 years. The lower field which gets the most water, and subsequently higher tax rate, is covered with 1/4' to 2" dia softwood saplings. The saplings bend over for the brush cutter; and trimming them off by hand is insane.
I found some tractor 3pt tree cutters. But I am guessing the small saplings would bind up or not cut on the carbide tips. Suggestions appreciated.
|
|
|
Re: Clearing sapling trees
[Re: Gary Olson]
#8697610
09/28/22 04:19 PM
|
Joined: Dec 2020
Posts: 1,421
Sewer rat
Pro Tracker
|
Pro Tracker
Joined: Dec 2020
Posts: 1,421 |
Spray them to kill them and then wait and they won’t be so flexible and can be mowed with a shredder.
|
|
|
Re: Clearing sapling trees
[Re: Gary Olson]
#8697612
09/28/22 04:21 PM
|
Joined: Apr 2005
Posts: 19,802
TurkeyHunter
THF Celebrity
|
THF Celebrity
Joined: Apr 2005
Posts: 19,802 |
How large of a field? What type of equipment do you have?
To be determined
|
|
|
Re: Clearing sapling trees
[Re: Gary Olson]
#8697636
09/28/22 04:57 PM
|
Joined: Aug 2009
Posts: 22,716
BigPig
THF Celebrity
|
THF Celebrity
Joined: Aug 2009
Posts: 22,716 |
We just mowed those over with a brush hog.
|
|
|
Re: Clearing sapling trees
[Re: BigPig]
#8697640
09/28/22 05:07 PM
|
Joined: Jan 2013
Posts: 960
Gary Olson
OP
Tracker
|
OP
Tracker
Joined: Jan 2013
Posts: 960 |
How large of a field? What type of equipment do you have? Small fields; both 4 acres. I can rent equipment for a one time clear out. But big equipment won't work so well in these small areas. We just mowed those over with a brush hog. I tried that. The saplings bent over with just one side stripped of bark. Nimble trees.
|
|
|
Re: Clearing sapling trees
[Re: Gary Olson]
#8697644
09/28/22 05:10 PM
|
Joined: May 2009
Posts: 24,344
dkershen
Rev Dave
|
Rev Dave
Joined: May 2009
Posts: 24,344 |
You could rent a skid steer forestry mulcher. Might be overkill but would do the job. But if you don't mow consistency after that they'll just come back. I'd probably start with Sewer Rats suggestion.
To be sure of hitting the target, shoot first and call whatever you hit the target.www.NewHopeEquine.com - Health and Healing through Horses.
|
|
|
Re: Clearing sapling trees
[Re: Gary Olson]
#8697704
09/28/22 06:24 PM
|
Joined: Feb 2011
Posts: 163
KHH
Woodsman
|
Woodsman
Joined: Feb 2011
Posts: 163 |
Skid steer with one of the Danuser intimidator tree pullers, or if your tractor has a skid steer quick attach one will go on it. Pulls roots and all out. I’ve used them from saplings to big boisdarc trees they are awesome tools.
|
|
|
Re: Clearing sapling trees
[Re: Gary Olson]
#8697739
09/28/22 07:15 PM
|
Joined: Nov 2012
Posts: 15,639
QuitShootinYoungBucks
THF Celebrity
|
THF Celebrity
Joined: Nov 2012
Posts: 15,639 |
Hit it with a chisel plow followed by a big, heavy offset.
https://web.archive.org/web/20170223065011/http:/www.rrdvegas.com/silencer-cleaning.html
|
|
|
Re: Clearing sapling trees
[Re: dkershen]
#8697762
09/28/22 07:41 PM
|
Joined: Mar 2019
Posts: 927
GNTX
Tracker
|
Tracker
Joined: Mar 2019
Posts: 927 |
You could rent a skid steer forestry mulcher. Might be overkill but would do the job. But if you don't mow consistency after that they'll just come back. I'd probably start with Sewer Rats suggestion. This would be my suggestion as well.
|
|
|
Re: Clearing sapling trees
[Re: Gary Olson]
#8697772
09/28/22 07:54 PM
|
Joined: Mar 2019
Posts: 927
GNTX
Tracker
|
Tracker
Joined: Mar 2019
Posts: 927 |
How large of a field? What type of equipment do you have? Small fields; both 4 acres. I can rent equipment for a one time clear out. But big equipment won't work so well in these small areas. We just mowed those over with a brush hog. I tried that. The saplings bent over with just one side stripped of bark. Nimble trees. Then you need to lower the cutting height on your shredder.
|
|
|
Re: Clearing sapling trees
[Re: KHH]
#8697773
09/28/22 07:58 PM
|
Joined: Sep 2007
Posts: 3,811
TDK
Extreme Tracker
|
Extreme Tracker
Joined: Sep 2007
Posts: 3,811 |
Skid steer with one of the Danuser intimidator tree pullers, or if your tractor has a skid steer quick attach one will go on it. Pulls roots and all out. I’ve used them from saplings to big boisdarc trees they are awesome tools. This! Remove and burn.
A.M. Little Bespoke Gunmakers LLC
|
|
|
Re: Clearing sapling trees
[Re: Gary Olson]
#8697810
09/28/22 09:10 PM
|
Joined: Oct 2017
Posts: 5,924
angus1956
THF Trophy Hunter
|
THF Trophy Hunter
Joined: Oct 2017
Posts: 5,924 |
Call Ol Thumper he's got the equipment for this.
|
|
|
Re: Clearing sapling trees
[Re: Gary Olson]
#8697851
09/28/22 10:26 PM
|
Joined: Feb 2008
Posts: 14,141
glens
THF Celebrity
|
THF Celebrity
Joined: Feb 2008
Posts: 14,141 |
Last edited by glens; 09/28/22 10:39 PM.
|
|
|
Re: Clearing sapling trees
[Re: Gary Olson]
#8697870
09/28/22 10:44 PM
|
Joined: Oct 2013
Posts: 5,928
Ol Thumper
THF Trophy Hunter
|
THF Trophy Hunter
Joined: Oct 2013
Posts: 5,928 |
What’s are your intentions with it when it’s cut?
The easiest/best method would be to run a mulcher over the saplings on a seek and destroy mission leaving the overgrown grasses for the shredder to handle after the saplings are taken down to ground level and shredded not leaving stobs sticking up every where. If you want to rent equipment and you can find a rental store that offers a skid steer with an open front brush cutter you can plow through all of it but you’ll have somewhat of a mess until you shred it a few times with your bush hog and you’ll still have a good many stobs sticking up for a while. You’ll still need to spray it next spring when it all starts growing again but that’s an easy fix.
The previous owner needs his gonads kicked for not maintaining it but that’s a routine fix, shoot me a pm if you have any questions. We’ve literally done thousands of acres just like yours and much worse coming out if CRP.
|
|
|
Re: Clearing sapling trees
[Re: glens]
#8698387
09/29/22 08:04 PM
|
Joined: Jan 2013
Posts: 960
Gary Olson
OP
Tracker
|
OP
Tracker
Joined: Jan 2013
Posts: 960 |
Rent you one of these with a skidsteer. . MightyAxe Tree Shear. They'll cut up to 12" easy and down to nothing.. This looks like a winner. I've got some wooded areas which could use some thinning of underbrush and small trees also. thank
|
|
|
Re: Clearing sapling trees
[Re: Gary Olson]
#8698806
09/30/22 11:25 AM
|
Joined: Sep 2012
Posts: 834
macec3(TX)
Tracker
|
Tracker
Joined: Sep 2012
Posts: 834 |
I cleaned up 40 acres of saplings with tractor and shredder. If they are thick, don't take a full shredder width. Take it slow and easy. Larger saplings (3") I cut low with chainsaw. My tractor is 70HP and the shredder was 5'.
|
|
|
Re: Clearing sapling trees
[Re: Gary Olson]
#8699294
09/30/22 11:51 PM
|
Joined: Jan 2010
Posts: 1,440
Shotgun Willie
Pro Tracker
|
Pro Tracker
Joined: Jan 2010
Posts: 1,440 |
DR Tree Chopper. Used one once. Works well on 2-3 inch trees like you said you have. Well enough that you'll soon be trying to chop bigger ones. Anything 4" and above will have you checking your fillings.
|
|
|
Re: Clearing sapling trees
[Re: Gary Olson]
#8699314
10/01/22 12:29 AM
|
Joined: Feb 2015
Posts: 5,585
hetman
"Trash Master"
|
"Trash Master"
Joined: Feb 2015
Posts: 5,585 |
CVR Manufacturing, Inc. is now building the Tree Chopper (formerly made by DR and ATV-X). It is an ATV (4 wheeler) mounted tree saw that allows you to drive up and over a tree up to 4 inches in diameter cutting it off flush with the ground. 60 day warranty. A video is available here: https://www.youtube.com/watch?v=yF9uxexunYoand here: https://www.youtube.com/watch?v=L_VljUmmCvEMade of durable, professional-grade steel, the device mounts securely to the front of most ATVs and cuts trees up to 4" thick in seconds. Unlike skid-steer mounted tree shears, the TreeChopper requires no external power source or stopping and waiting for hydraulic jaws to open and close around the tree. The TreeChopper can cut hundreds of trees per hour. How the TreeChopper works: Forward fixed blades on each side of the device score the trunk and help guide the tree toward circular rotating blades in the center. Just like a pipe cutter slices through metal, circular blades rotate as the ATV accelerates through the trunk, cutting cleanly from each side. The device's trailing blade shears off the stump smoothly from the back. The blades cut flush to the ground, leaving a stump no more than a 1/4" high, so the tree won't re-grow. Key features of the new Tree Chopper include T-100 tempered steel blades and a durable, corrosion resistant powder coat finish. Field testing with the unit proves the durable blades will cut over 300,000 trees before they need to be replaced. CVR Manufacturing, Inc. Galesburg Kansas 620-763-2500 Additional Description CVR Tree chopper
"Lesser mortals are pitied for the misfortune in not being born Texan."
|
|
|
Re: Clearing sapling trees
[Re: Shotgun Willie]
#8699317
10/01/22 12:31 AM
|
Joined: Feb 2008
Posts: 14,141
glens
THF Celebrity
|
THF Celebrity
Joined: Feb 2008
Posts: 14,141 |
DR Tree Chopper. Used one once. Works well on 2-3 inch trees like you said you have. Well enough that you'll soon be trying to chop bigger ones. Anything 4" and above will have you checking your fillings.
|
|
|
Re: Clearing sapling trees
[Re: Gary Olson]
#8699323
10/01/22 12:48 AM
|
Joined: Jun 2014
Posts: 691
Anton Chigurh
Tracker
|
Tracker
Joined: Jun 2014
Posts: 691 |
Sounds like you’re talking about some type of pine tree sapling, which I have no experience clearing personally. In my area we deal with what we call cedar, but are actually Ashe juniper. If I’m clearing an area of small cedars where density is sparse enough to deal with each plant individually, I’m using a larger tracked skid steer with an danuser intimidator and plucking each plant. Gather and pile them with a grapple rake if desired.
If they are so thick dealing with individual plants is impossible or will take forever, then a mulcher or brush cutter on a tracked skid steer is the way to go.
Then you can maintain with a tractor and shredder
|
|
|
Re: Clearing sapling trees
[Re: GNTX]
#8699393
10/01/22 02:37 AM
|
Joined: Jan 2013
Posts: 960
Gary Olson
OP
Tracker
|
OP
Tracker
Joined: Jan 2013
Posts: 960 |
Then you need to lower the cutting height on your shredder. More surprises. The previous owner(s) lacked common sense. I've whacked into too many stumps and rocks and abandonded fencing parts with no warning. I have to cut high when moving into areas I haven't personally cleared.
|
|
|
Moderated by bigbob_ftw, CCBIRDDOGMAN, Chickenman, Derek, DeRico, Duck_Hunter, hetman, jeh7mmmag, JustWingem, kmon11, kry226, kwrhuntinglab, Payne, pertnear, rifleman, sig226fan (Rguns.com), Superduty, TreeBass, txcornhusker
|