Curtis Vector
Bartlein 22” 6.5cm
Krg whiskey 3 chassis
Jewell trigger
Nightforce nx8 4-32
Little bastard brake
Atlas 5h on a custom spigot I made

just when you think youve seen it all a 50 blackout i really dont need one almost sorry i saw that

It's done. The Lego pieces I chose:

223 Wylde
* Aero Precision 18", 8 twist, rifle length gas, stainless
Aero Precision M4E1 upper and lower
Faxon Gunner low-mass BCG
CMC Single Stage Drop-In 2.5lb Competition
Magpul stock
Aero Precision parts kits, gas tube, adjustable gas block, Enhanced Carbine buffer kit (haven't decided on what spring and buffer I'll use in the end)
Ergo Grip
BCM ambidextrous charging handle
Coda 15" Carbon Fiber handguard
JP 20 MoA mount
* Tract Toric 4.5-30x56 Mil
Atlas bipod
APA Micro Bastard brake (Alamo Precision)
Sierra Match King 69 grain (Varget, no load yet)

* May replace

I'm old school. I like nice wood and steel. lol

Interarms Mark X action
26" Douglas .264 Win Mag barrel
Myrtle wood stock, Griffin & Howe style with skip line checkering
Leupold VX-3i 3.5-10mm

That's a sharp looking rifle, thedoveshooter.

Some beautiful guns here !!! I now have 2 custom Rifles. Both Built By ALTUS Shooting Solutions. i have another which should be finished in a month

6.5 Creedmoor
Proof Barrel
Manners Elite
Hawkins bottom metel
Trigger Tech Diamond
Fusion Titanium action
Omega 30 can.
Swarovski Z6, 5-30, Custom BDC Turret made for my handload.





.22lr, I call her "COTTONMOUTH"
Vudoo Barreled action, MTU contour
Manners PRS1 stock
Trigger Tech Diamond
Hawkins Bottom metal
Nightforce SHV 5-20x56 for now.

FN 24 Mauser action
.284 Win, 23” Douglas barrel
Timney Trigger
Walnut stock
All work done by the late Bob Mitchell of South Houston.

When did you have that built?
Bob Mitchell sounds very familiar, My father, Robbie Robbins mentored quite a few up and coming gunsmiths back in the 60’s through 1975, Robbie’s gun shop in Pasadena.
Good looking build !

My latest from Alamo Precision. 6mmBR, could be bought

Action: Defiance Tenacity (GA Precision version)
Barrel: 22" Bartlein M24 Fluted
Brake: Hawkins
Caliber: 308
Bottom: Grayboe
Stock: Grayboe Renegade Multi-Cam
Rings: Seekins
Scope: Nightforce NXS 5.5 - 22

Guess I need to take a picture of it

Glad to see this resurrected! Will post some soon!

Defiance, Bartlien, Jewell, KRG whiskey 3, chambered by alamo..

If you are looking to build or update what you have you need to call Jon Trammel in Breckenridge. (254-559-3455)
He is not only a certified gunsmith, he is also a F-class shooter and builds rifles for hunting from varmints to African big four.
He was trained at the Colorado gunsmith school back in the 80’s so he has pretty much seen it all. Call and talk to him and you will know I am right.

I've put together a few over the years.
6.5 CM
Shilen DGR action
26" Shilen select match barrel
Trigger Tech Special trigger - hadn't arrived when pic was taken
KRG Whiskey 3 chassis
IOR Recon 4-28x50 scope mounted in ARC M10 rings
Cerekoted Burnt Bronze by Trinity Ordnance, Lake Worth,TX.



22 CM
ARC Nucleus Gen 1 action
20" X-Caliber barrel
Trigger Tech Diamond trigger
KRG Bravo chassis
S&B PMII 5-25x56 scope in ARC M10 rings



223 Remington
ARC Nucleus Gen 2 action
20" Rock Creek barrel
Trigger Tech Special trigger
KRG Bravo chassis painted with Alcohol Inks by myself
S&B PMII 5-25x56 scope in ARC M10 rings



25 CM
ARC Archimedes action
24" X-Caliber barrel - Barrel hasn't arrived yet, so I installed a spare 6.5 CM barrel on it until it shows up.
Trigger Tech Special trigger
Woox Exactus chassis
Athlon Cronus 4.5-29x56 scope in ARC M10 rings

SMR 7mm SAUM
Defiance Anti SA
Proof 22-in Sendero
Nightforce NX8 2.5-20 F1
Hawkins Long Range Hybrid Rings
SMR Titanium 2-port brake
McMillan Game Warden

You sure do cheap out on components and optics

Bump

Large ring small thread Mauser action with the front ring sides machined flat. German claw mount arrangement w/front dovetailed and rear soldered. 3-Pos safety. Standard floor plate bottom metal w integral box, height slightly reduced. 23” barrel machines octagon to round with integral full length rib and integral sling base. Turkish walnut stock shaped to my style and dimensions w/horn grip cap and butt plate. I’d shoot for 6 1/4-6 1/2lbs w/o optic. Leupold VX3 1.5-5x20 is just fine. 6.5x55 or 6.5x57. Minimal English scroll and border engraving with makers name on barrel and rib engraved with squiggly pattern. Gloss DLC metal coating.

6mm Creedmoor
Trued Remington 700
Bartlein 1:8, 24”, Rem. varmint contour.
Hogue Overmolded stock, w/ alum. chasis
J&S Brake
Wyatt’s bottom metal & mags
Barrel work & ‘Titanium’ cerakote done by Tony.
Running 105 Barnes Match Burner, Lapua brass, CCI 450 and 39.5 gr. H4350 2970 fps.