texashuntingforum.com logo
Main Menu
Advertisement
Affiliates
Advertisement
Newest Members
TraeMartin, Beatixre, MooseSteed, Trappernewt, casyoo
71987 Registered Users
Top Posters(All Time)
dogcatcher 110,788
bill oxner 91,416
SnakeWrangler 65,414
stxranchman 60,296
Gravytrain 46,950
RKHarm24 44,585
rifleman 44,461
Stub 43,764
Forum Statistics
Forums46
Topics536,989
Posts9,719,185
Members86,987
Most Online25,604
Feb 12th, 2024
Print Thread
Neck tension…how much is too much? #8321591 07/15/21 01:03 PM
Joined: Sep 2008
Posts: 3,766
P_102 Offline OP
Extreme Tracker
OP Offline
Extreme Tracker
Joined: Sep 2008
Posts: 3,766
From what I’ve read consistency is most important but how much tension is too much? I’m getting inside diameter readings of .003 to .005 smaller than the diameter of the bullet. Do I need to be more in the .001 to .002 range?


Do not trifle in the affairs of dragons, for thou art crunchy and taste good with ketchup.
Re: Neck tension…how much is too much? [Re: P_102] #8321611 07/15/21 01:15 PM
Joined: Dec 2008
Posts: 41,083
J.G. Online Content
THF Celebrity
Online Content
THF Celebrity
Joined: Dec 2008
Posts: 41,083
.005 is what I use for my AR-10 ammo as opposed to crimping.

.001" to .003" is optimal in my opinion. .002" is where I tend to go on bushing sizing.


[Linked Image]
800 Yard Steel Range
Precision Rifle Instruction
Memberships and Classes Available
Re: Neck tension…how much is too much? [Re: P_102] #8321646 07/15/21 01:41 PM
Joined: May 2016
Posts: 2,420
Y
yotehater Offline
Veteran Tracker
Offline
Veteran Tracker
Y
Joined: May 2016
Posts: 2,420
Check your expander ball, it might be undersized. At .005" it could crush the necks on some small calibers or thin/annealed cases.


One shot is all it should take.
Re: Neck tension…how much is too much? [Re: P_102] #8321796 07/15/21 03:36 PM
Joined: Jun 2009
Posts: 4,175
K
Korean Redneck Online Content
Extreme Tracker
Online Content
Extreme Tracker
K
Joined: Jun 2009
Posts: 4,175
There is a youtube guy called Bolt Action Reloading that I tend to like. He did a video on this topic with 21st century expander mandrels, sorry no youtube here at work so can't link it. Certainly not the be-all-end-all, but i found it enlightening.

I wanted to try out fl sizing my brass without the expander ball and using a mandrel expansion step instead. But i didn't feel like testing a bunch of different sizes. The above referenced and some other stuff I saw, i decided to go with 0.0015" mandrel under bullet diameter. I like the results so far. I don't have all these run out tools and gauges but the shooting results seem promising so far with my very small sample set. but that can also be purely in my head at this point. I haven't tried any other size to know it this the optimal neck tension so i have no basis for comparison.


I'm a dude who likes long barrels!
Re: Neck tension…how much is too much? [Re: P_102] #8321834 07/15/21 04:00 PM
Joined: Dec 2009
Posts: 5,430
B
Big Fitz Offline
THF Trophy Hunter
Offline
THF Trophy Hunter
B
Joined: Dec 2009
Posts: 5,430
How are you measuring the ID, Chris? It is hard (for me) to get consistent ID measurements using calipers. Suggest measuring the OD of your sized brass then seat bullet and measure again. I think this will give your more accurate and repeatable results. .002 seems to be the consensus. I'm using bushing dies with the expander ball removed and then use a mandrel for final neck expansion. I'm still playing around with this process.


Originally Posted by onlysmith&wesson
I was wrong...on anything technical.

Originally Posted by Sailor
Fitz............. is right, ya know............
Re: Neck tension…how much is too much? [Re: P_102] #8321841 07/15/21 04:03 PM
Joined: Sep 2008
Posts: 3,766
P_102 Offline OP
Extreme Tracker
OP Offline
Extreme Tracker
Joined: Sep 2008
Posts: 3,766
Thanks guys…..KR, do you find that the brass holds that diameter or does it spring back any?


Do not trifle in the affairs of dragons, for thou art crunchy and taste good with ketchup.
Re: Neck tension…how much is too much? [Re: P_102] #8321892 07/15/21 04:39 PM
Joined: Jun 2009
Posts: 4,175
K
Korean Redneck Online Content
Extreme Tracker
Online Content
Extreme Tracker
K
Joined: Jun 2009
Posts: 4,175
Originally Posted by P_102
Thanks guys…..KR, do you find that the brass holds that diameter or does it spring back any?


I couldn't tell you because i don't really have a tool to measure. I assume it springs back some. I still have some of the first set of brass I used so I will go home a measure the best i can with calipers.


I'm a dude who likes long barrels!
Re: Neck tension…how much is too much? [Re: P_102] #8321941 07/15/21 05:31 PM
Joined: Sep 2006
Posts: 32,442
kmon11 Offline
junior
Offline
junior
Joined: Sep 2006
Posts: 32,442
Annealing can help with the spring back. Some anneal every time while others every second or third loading. I am in the 2 to 3 round group depending on the brass and how it does.

I load for the Grendel mostly these days and for the AR .004 to .005 and the boltaction .002 is my target.

With the 6.5-284 and 7mm-08 both bolt actions, .002 is the target.

The only cartridges I crimp these days is handgun and straight walled rifle cases

Last edited by kmon1; 07/15/21 05:34 PM.

lf the saying "Liar, Liar your pants on fire" were true
Mainstream news might be fun to watch
Re: Neck tension…how much is too much? [Re: P_102] #8321958 07/15/21 05:53 PM
Joined: Oct 2013
Posts: 5,883
Ol Thumper Offline
THF Trophy Hunter
Offline
THF Trophy Hunter
Joined: Oct 2013
Posts: 5,883
If I’m going strictly off the size then .002” is a good mark for a bolt gun but I prefer using a Hydro Seater and going off seating pressure so I know exactly what my bullet seating pressure is but if you ask 10 people you will likely get 13 answers. With seating pressure I’ve found you can consistently tune your gun to the neck tension this way but in all honesty most people are not good enough to see the difference in all this trouble and if I’m being honest me either most of the time.

As far as annealing goes, I generally anneal after every round to keep the brass softer but again it’s more so out of habit and paying so much for an annealer than actual need and the average guy won’t see the advantages of this other than I feel like the brass life is longer going to this extreme.

Re: Neck tension…how much is too much? [Re: P_102] #8321984 07/15/21 06:13 PM
Joined: May 2016
Posts: 2,420
Y
yotehater Offline
Veteran Tracker
Offline
Veteran Tracker
Y
Joined: May 2016
Posts: 2,420
If you're brass is too thick there's always neck turning. But all of the die makers offer oversize expander balls for a reason. I'm one of those that neck turn and use both bushing dies and the expander to minimize working the necks. Anneal every 3rd firing.

If you don't neck turn the brass every one has different neck tension anyway bushing dies or not. Used dies are notorious for having the expander balls reduced.


One shot is all it should take.
Re: Neck tension…how much is too much? [Re: yotehater] #8321988 07/15/21 06:20 PM
Joined: Dec 2008
Posts: 41,083
J.G. Online Content
THF Celebrity
Online Content
THF Celebrity
Joined: Dec 2008
Posts: 41,083
Originally Posted by yotehater
If you're brass is too thick there's always neck turning. But all of the die makers offer oversize expander balls for a reason. I'm one of those that neck turn and use both bushing dies and the expander to minimize working the necks. Anneal every 3rd firing.

If you don't neck turn the brass every one has different neck tension anyway bushing dies or not. Used dies are notorious for having the expander balls reduced.


I have necked down Lake City .308 Win into 7mm-08. And it made good ammo.

Neck turning, seating tension .0005" here and there, brass spring back all takes a back seat to bullet jump/jam relationship, and THE right powder charge. After of course one loaded the proper length bullet for the twist rate.

Weighing brass and sorting might be beneficial, and I've done it few few times. But it is no where near the norm for me.

Lots of this stuff can become background noise and get people wrapped around the axle.


[Linked Image]
800 Yard Steel Range
Precision Rifle Instruction
Memberships and Classes Available
Re: Neck tension…how much is too much? [Re: P_102] #8322004 07/15/21 06:43 PM
Joined: Apr 2015
Posts: 315
D
diablodog Offline
Bird Dog
Offline
Bird Dog
D
Joined: Apr 2015
Posts: 315
Before there was brass and dies , I use to turn new 6.5x55 Swede cases into 7.5mm French ammo by seating a .308 boat tail bullet into the charged 6.5mm case . It shot very well with no problems . It also had the same velocity and POI has later loaded 7.5mm from the fireformed cases .

Re: Neck tension…how much is too much? [Re: P_102] #8322017 07/15/21 06:54 PM
Joined: Sep 2008
Posts: 3,766
P_102 Offline OP
Extreme Tracker
OP Offline
Extreme Tracker
Joined: Sep 2008
Posts: 3,766
I’m using the opposite side of my calipers that is made for this type of measurement, Tim, but your suggestion does make a lot of sense!
I don’t have the mandrel but will probably go that route since I’ll soon be switching over to Lapua Brass.


Do not trifle in the affairs of dragons, for thou art crunchy and taste good with ketchup.
Re: Neck tension…how much is too much? [Re: P_102] #8322414 07/16/21 01:38 AM
Joined: Jun 2009
Posts: 4,175
K
Korean Redneck Online Content
Extreme Tracker
Online Content
Extreme Tracker
K
Joined: Jun 2009
Posts: 4,175
Originally Posted by P_102
Thanks guys…..KR, do you find that the brass holds that diameter or does it spring back any?


First, I misremembered. I ended up getting a 0.002" neck tension (a 0.3060" mandrel for my 308).

Measuring with my calipers, I was getting .305" as the ID of most of the case mouths. So it does seem like there is some spring back.


I'm a dude who likes long barrels!
Re: Neck tension…how much is too much? [Re: Korean Redneck] #8323477 07/17/21 03:17 AM
Joined: Sep 2010
Posts: 547
S
StraitShot Offline
Tracker
Offline
Tracker
S
Joined: Sep 2010
Posts: 547
Originally Posted by Korean Redneck
There is a youtube guy called Bolt Action Reloading that I tend to like. He did a video on this topic with 21st century expander mandrels, sorry no youtube here at work so can't link it. Certainly not the be-all-end-all, but i found it enlightening.

I wanted to try out fl sizing my brass without the expander ball and using a mandrel expansion step instead. But i didn't feel like testing a bunch of different sizes. The above referenced and some other stuff I saw, i decided to go with 0.0015" mandrel under bullet diameter. I like the results so far. I don't have all these run out tools and gauges but the shooting results seem promising so far with my very small sample set. but that can also be purely in my head at this point. I haven't tried any other size to know it this the optimal neck tension so i have no basis for comparison.


Just as a side note... the Mandrel also produces straighter brass as indicated by my own measurements... .... I FL size and none of my dies have stem or expander ball...

Re: Neck tension…how much is too much? [Re: P_102] #8323871 07/17/21 07:23 PM
Joined: May 2011
Posts: 1,986
T
TAB Offline
Pro Tracker
Offline
Pro Tracker
T
Joined: May 2011
Posts: 1,986
.002-.0025” is just about perfect, I’ve found when you get to .003 or more you start leaving impressions on the bullets no matter the style of seater you use.

Re: Neck tension…how much is too much? [Re: P_102] #8323935 07/17/21 08:59 PM
Joined: Mar 2009
Posts: 4,422
J
jeffbird Offline
Extreme Tracker
Offline
Extreme Tracker
J
Joined: Mar 2009
Posts: 4,422
After resizing, let the brass sit for a few weeks and measure again. The results can be surprising and what caused me to start experimenting with annealing, which is its own rabbit hole.

Re: Neck tension…how much is too much? [Re: P_102] #8324367 07/18/21 04:07 PM
Joined: Jun 2011
Posts: 33,787
B
Buzzsaw Offline
THF Celebrity
Offline
THF Celebrity
B
Joined: Jun 2011
Posts: 33,787
precision reloading IS a rat hole


SPACE FOR RENT


Re: Neck tension…how much is too much? [Re: Buzzsaw] #8324393 07/18/21 05:10 PM
Joined: May 2011
Posts: 1,986
T
TAB Offline
Pro Tracker
Offline
Pro Tracker
T
Joined: May 2011
Posts: 1,986
Originally Posted by Buzzsaw
precision reloading IS a rat hole

This is truth

Deep wide hole

Re: Neck tension…how much is too much? [Re: TAB] #8324579 07/18/21 11:47 PM
Joined: Jan 2009
Posts: 19,157
J
Judd Offline
#1 Creedmoor Fan
Offline
#1 Creedmoor Fan
J
Joined: Jan 2009
Posts: 19,157
Originally Posted by TAB
Originally Posted by Buzzsaw
precision reloading IS a rat hole

This is truth

Deep wide hole


x3 grin

P102 - You have to experiment to see the right answer. I can tell you I had a 6.5x47 that loved neck tension…seemed the tighter you went the better it shot…that was the only barrel I ever had that liked a lot of tension. I went as high as .006 but it would shave copper from the bullet there but that’s where it started falling off. How it started was I couldn’t get that barrel to shoot where I like to shoot them so I got new brass and was in a hurry to fire form them so just loaded them (lapua out of the blue box on x47 brass is normally .004 tight) and it shot the best I’d seen that barrel shoot. So I naturally explored and worked in that area. Found something it liked for about 750 rounds and ran it. That barrel never was a real good one though.

I normally take virgin brass and run a K&M expander in it. Most decent barrels will shoot something with that neck tension and I measure so my bushing or expanders match. Generally speaking that’s in the 001-.002 range.


Originally Posted by Phil Robertson
Don't let your ears hear what your eyes didn't see, and don't let your mouth say what your heart doesn't feel
Re: Neck tension…how much is too much? [Re: TAB] #8324932 07/19/21 01:16 PM
Joined: Jun 2009
Posts: 4,175
K
Korean Redneck Online Content
Extreme Tracker
Online Content
Extreme Tracker
K
Joined: Jun 2009
Posts: 4,175
Originally Posted by TAB
Originally Posted by Buzzsaw
precision reloading IS a rat hole

This is truth

Deep wide hole


Yea, but it is highly entertaining sometimes. I kinda like all the experimenting and trying things.


I'm a dude who likes long barrels!
Re: Neck tension…how much is too much? [Re: P_102] #8324951 07/19/21 01:34 PM
Joined: Sep 2008
Posts: 3,766
P_102 Offline OP
Extreme Tracker
OP Offline
Extreme Tracker
Joined: Sep 2008
Posts: 3,766
Entertaining as well as frustrating. I am a person that prefers absolutes, which, I have found, are few and far between in reloading.
OTOH, a good challenge can be fun.


Do not trifle in the affairs of dragons, for thou art crunchy and taste good with ketchup.
Previous Thread
Index
Next Thread

© 2004-2024 OUTDOOR SITES NETWORK all rights reserved USA and Worldwide
Powered by UBB.threads™ PHP Forum Software 7.7.3