Okay, I will be the one that asks. Please give some details on the engine and drive train please. Hope your granddaughter has fun and wins.
It's a limited class that allows a 602 sealed crate motor with a 5500RPM chip or basically stock SBC 350 with 6000RPM chip.
Both engines must run a 500CFM 2bbl Holley and same headers and have same weight limit.
We went with a crate 602 from Freisen because it has better heads and intake than allowed on "open" engine that is hard to overcome, even with the 500RPM difference and it has really good torque and HP in the range we need.
Running a 2000K stall circle track converter hooked to a GM Powerglide transmission with low gear and reverse only that I build myself for our cars.
Frame and suspension is GM metric frame used in Monte Carlos, etc.
We didn't get the wrap done in time for this race due to a computer crash so put the ole blue sides back on it for another round.
Here is the video of race from last weekend.