Picked up this old Mule about a year ago and slowly brought it back to life.
It had the small plastic factory roof on it but was pretty small.
I had built a similar roof for my first Mule so I had thought this one thru a little better.
I welded tabs on front and rear of overhead cage and attached a piece of 48" x 58" 3/4 exterior form grade plywood that was painted with OD green porch paint.
The perimeter frame is welded 1-1/4" angle iron 1/8" thick with pockets in each corner for blind use with 1/2" pipe rails painted semigloss black.
I added a small 20w motorcycle FM/USB/SD head unit and pair of 5-1/4" waterproof boat speakers to finish it out.
Yeah, the white tie wraps are killing me and will be changed to black when social distancing is over!