I’m wanting to see one in person. The owner of Q is already talking [censored] about it, guess he can’t handle competition and apparently his customer service sucks.

Probably because it's 1/2 the price of his.

I’m wanting to see one in person. The owner of Q is already talking [censored] about it, guess he can’t handle competition and apparently his customer service sucks.

I’ve thought about necking up the 6.5 PRC to a 6.8 to push a 170 Berger. Case capacity is a fair bit lower than 270 WSM. Advantages would be better / more avail 6.5 PRC brass, more efficient case design, and easier on the throat than the 270 wsm. Just not enough high bc bullet options.

But a 7mm PRC... I was just talking to Derrick at horizon firearms and he recently did a 7-6.5 PRC in his personal rifle. Pushing 175 eldx at 2800 out of a 22” barrel suppressed. This beats my 280ai out of a 25” with exact same powder charge of h4831sc. Would make a nice light weight, easy handling mountain rifle

Seems like possibly your load isn't taking advantage of all the case has to offer or his is just pushing the pressure envelope a little more.

Yes he has. He used to work for Sig years ago. The guy is a total douche bag, you should see some of the posts he's made on Snipers Hide.

Snipers Hide Q

From what I understand, Sig has been working on this rifle for a long time, and Q or whateverthefuckhisnameis, was on that team to design it. He left during development and rushed his rifle to market before Sig.

They are running light for caliber bullets at velocities that create ballistic profiles achieved in short barrels with cartridges already in existence. Would they be overbore? Yes, would you need special steel/brass hybrid cases and 80k of pressure, NO.

Run the numbers-- if you can get a 6.5mm bullet of the same weight going around 2700fps from a 16" barrel it matches or beats the downrange ballistics of the Fury and does it will less wind drift and again, without some crazy case.