It will be the bigger one with 1/4 inch shaft. I have a lamco and another one on order but I was looking at doing something similar to my current barrel feeders. I was thinking if I inverted the motor inside the barrel I could make a plate with savers like the lamco. I would mount my control box to barrel or the barrel band. That way nothing would be hanging down under the barrel for hogs to tear up. Any suggestions?
They mount the motors on all their road feeders and stand and fill upside down. I would be surprised if they didn’t have everything you need. If you need longer motor wires, they probably have that too since the motor wiring runs a few feet to the control box on the stand and fills.