texashuntingforum.com logo
Main Menu
Advertisement
Affiliates
Advertisement
Newest Members
TraeMartin, Beatixre, MooseSteed, Trappernewt, casyoo
71987 Registered Users
Top Posters(All Time)
dogcatcher 110,788
bill oxner 91,416
SnakeWrangler 65,413
stxranchman 60,296
Gravytrain 46,950
RKHarm24 44,585
rifleman 44,461
Stub 43,764
Forum Statistics
Forums46
Topics536,987
Posts9,719,150
Members86,987
Most Online25,604
Feb 12th, 2024
Print Thread
Refinishing cabinet doors #7590594 08/27/19 05:27 AM
Joined: May 2013
Posts: 4,091
CharlieCTx Offline OP
Extreme Tracker
OP Offline
Extreme Tracker
Joined: May 2013
Posts: 4,091
We have some very dark brown (espresso is the color) kitchen cabinets that given their color, show scratches and the like, very well. I'd like to give refinishing some a go, doesn't seem to o difficult, but metal is my preferred medium, never done much with wood. I do have an electric orbital palm sander and air-powered dual action sander.

Can some of you woodworking types provide some advice on sand paper grit and the process? I'd guess a 400 grit followed something like an 800. Coat of stain or two, then a coat of satin clear? A couple will require a full panel sand as the clear layer is what is damaged (came off with painters tape??). Others are scratch repair of varying sizes, I'm hoping I can get away with some spot repairs vs having to sand/refinish the whole panel on most.

Thanks
Charlie

Re: Refinishing cabinet doors [Re: CharlieCTx] #7590718 08/27/19 12:32 PM
Joined: Nov 2009
Posts: 91,416
bill oxner Offline
THF Celebrity
Offline
THF Celebrity
Joined: Nov 2009
Posts: 91,416
Prayers up.


Quail hunting is like walking into, and out of a beautiful painting all day long. Gene Hill


[Linked Image]




Re: Refinishing cabinet doors [Re: CharlieCTx] #7590902 08/27/19 03:23 PM
Joined: Mar 2009
Posts: 810
J
JESmith Offline
Tracker
Offline
Tracker
J
Joined: Mar 2009
Posts: 810
Not sure of the age of your cabinets. Mine were 25 yrs old with dark oak stain. I used mineral spirits with scotch brite pad and a razor blade (gasket scraper from the auto parts store) to strip off the old finish. I only took off what would come off and left the rest. I then went back over it with a color matched stain. While not perfect, they look 10 times better than they did. Only took about 20 min per door.

Re: Refinishing cabinet doors [Re: bill oxner] #7591417 08/27/19 11:54 PM
Joined: May 2013
Posts: 4,091
CharlieCTx Offline OP
Extreme Tracker
OP Offline
Extreme Tracker
Joined: May 2013
Posts: 4,091
Originally Posted by bill oxner
Prayers up.

Amen brother!


Originally Posted by JESmith
Not sure of the age of your cabinets. Mine were 25 yrs old with dark oak stain.

These are only 4 years old maybe, just wanting to clean up the appearance and fix the couple of spots where the clear coat came off in a big way.

Charlie

Re: Refinishing cabinet doors [Re: CharlieCTx] #7591839 08/28/19 02:15 PM
Joined: Dec 2010
Posts: 6,821
hopalong Online Content
THF Trophy Hunter
Online Content
THF Trophy Hunter
Joined: Dec 2010
Posts: 6,821
you need to check in some hidden spot to see if polyurethane will work, they are most likely finished with lacquer and the 2 do not mix, wrinkle finish will occur.

best way is strip the finish off, sand wood smooth then stain and refinish. sanding will almost never look right since it is hard to feather out the edges of the finish. there are some excellent strippers that are really easy to use and should cut down on time it takes to get r done.



lake fork FISHERMANS COVE MARINA - 903 474 7479 reservations

Re: Refinishing cabinet doors [Re: CharlieCTx] #7592756 08/29/19 01:00 PM
Joined: Apr 2009
Posts: 6,096
P
pdr55 Offline
THF Trophy Hunter
Offline
THF Trophy Hunter
P
Joined: Apr 2009
Posts: 6,096
Might give Homer Formbys refinisher a try.
I’ve had some excellent results with this product.


If you`re running down my country, man,
You`re walking on the fighting side of me. (Merle)
Re: Refinishing cabinet doors [Re: CharlieCTx] #7599626 09/06/19 04:32 PM
Joined: Oct 2011
Posts: 3,161
S
SouthWestIron Offline
Veteran Tracker
Offline
Veteran Tracker
S
Joined: Oct 2011
Posts: 3,161
Prayers are not needed gumption however is!

Last edited by SouthWestIron; 09/06/19 04:32 PM.
Re: Refinishing cabinet doors [Re: CharlieCTx] #7599924 09/06/19 10:28 PM
Joined: Mar 2009
Posts: 382
M
MRR Offline
Bird Dog
Offline
Bird Dog
M
Joined: Mar 2009
Posts: 382
Post picture of doors

Re: Refinishing cabinet doors [Re: CharlieCTx] #7600147 09/07/19 03:24 AM
Joined: Dec 2012
Posts: 11,857
S
Simple Searcher Offline
THF Celebrity
Offline
THF Celebrity
S
Joined: Dec 2012
Posts: 11,857
Agreed, A picture would help.
I have refinished many doors. If they are aren't flat slab doors, put the sandpaper away, it is only good for the flat surfaces. Getting into routered edges and panel corners will require stripping.
Paint thinner (mineral spirits) and steel wool are the best bet. Some finishes may require lacquer thinner or stripper.
Depending on the door size you may be able to put the doors in a pan and submerge them and allow them to soak for a few minutes. The finish may begin to wrinkle and fall off, a putty knife to scrape off the old stuff is handy.


[Linked Image]

"Man is still a hunter, still a simple searcher after meat..." Robert C. Ruark
Re: Refinishing cabinet doors [Re: CharlieCTx] #7601060 09/08/19 05:33 AM
Joined: May 2013
Posts: 4,091
CharlieCTx Offline OP
Extreme Tracker
OP Offline
Extreme Tracker
Joined: May 2013
Posts: 4,091
The doors are a nicer raised panel,solid wood door, not flat and haven't been up more than maybe 4 years or so. I tried an iPhone pic but given the Espresso-type color, it was pretty pointless. I'm not looking to pull them all down and refinish, just touch-up some areas for example that have some wear from not having had pulls/handles installed for most of their years and some scratches and the like.

I'm trying to correlate this to paint repair on a car for example which I know how to do, so I'm over-thinking this... I think the steel wool approach is likely my best bet for most of what I have to do, the worst cabinet probably needing some sanding with a steel wool feather. I do have a can of the original stain so I can get the original tint.

It does have a satin type finish which must be a clear coat given some of the chipping I want to address.

Do I put the stain and clear on with a pad, sponge brush or brush?

Thanks!
Charlie

Re: Refinishing cabinet doors [Re: CharlieCTx] #7601134 09/08/19 02:00 PM
Joined: Aug 2011
Posts: 13,409
J
jdk1985 Offline
THF Celebrity
Offline
THF Celebrity
J
Joined: Aug 2011
Posts: 13,409
One thing - if you decide sanding is a viable option, 400-800 grit is likely way too high. It will take forever and could burnish the wood. GRANTED, most of my sanding is with bare wood, NOT trying to REfinish stained / lacquered wood. I would use 120 to quickly remove the finish, then 220 to finish sand. You could go up to 300, but with bare wood, there is no need to go any further than that. Stain or touch up the stain as needed and recoat with clear poly or lacquer, depending on your need/preference.


Instagram @justinkingwoodworking
Re: Refinishing cabinet doors [Re: CharlieCTx] #7601136 09/08/19 02:04 PM
Joined: Aug 2011
Posts: 13,409
J
jdk1985 Offline
THF Celebrity
Offline
THF Celebrity
J
Joined: Aug 2011
Posts: 13,409
Originally Posted by CharlieCTx


Do I put the stain and clear on with a pad, sponge brush or brush?
Charlie


For the stain, it shouldn't matter, since you will wipe off the excess and not let the stain dry on the outside. Just make sure to go with the grain as much as possible.

[If you are touching up rather than doing a full re-stain, use a tool that will help you target only the required area. There's no reason to create unnecessary mess.)

For the clear, ideal would be to spray it on, if you have access to that equipment. Otherwise, whatever tool you use, take care to avoid creating air bubbles in the finish. I've used all three methods. If you want to put on a very - very - thin coat, a clean, nicely folded rag is pretty useful for this.

Last edited by jdk1985; 09/08/19 02:06 PM.

Instagram @justinkingwoodworking
Re: Refinishing cabinet doors [Re: CharlieCTx] #7601211 09/08/19 04:45 PM
Joined: May 2013
Posts: 4,091
CharlieCTx Offline OP
Extreme Tracker
OP Offline
Extreme Tracker
Joined: May 2013
Posts: 4,091
Thanks for the input, I'll tell my wife you guys told me how to do it. 😀

Charlie

Re: Refinishing cabinet doors [Re: CharlieCTx] #7601583 09/09/19 12:08 AM
Joined: Jul 2012
Posts: 15,605
6
603Country Offline
THF Celebrity
Offline
THF Celebrity
6
Joined: Jul 2012
Posts: 15,605
We, the wife and I, recoated some old cabinet doors. They were going to be very tough to actually refinish, so we tried a different approach. We found a gel type stain/finish to try. We wiped down the doors with mineral spirits and alcohol (covered all bases) and applied the gel coat in a color only slightly darker than the original finish. They came out great.

But no way I can remember exactly what we used. I suppose I’d go to a pro type paint shop, like Sherwin Williams, and discuss options.

As a woodworker, I’d rather build new cabinet doors than do the detail work to refinish recessed Panel doors.


Not my monkeys, not my circus...
Re: Refinishing cabinet doors [Re: CharlieCTx] #7601719 09/09/19 02:17 AM
Joined: Jul 2015
Posts: 23,147
Bee'z Offline
The Beedazzler
Offline
The Beedazzler
Joined: Jul 2015
Posts: 23,147
I did this last fall and it sucked. The end result was worth it but sanding is a complete PITA. All the nooks and crannies suck to get to and there just is no easy way about it. We stained and applied the poly with foam brushes. 2 coats stain and 4 coats water based poly and it really turned out great.


[Linked Image]
Re: Refinishing cabinet doors [Re: 603Country] #7603368 09/10/19 08:21 PM
Joined: Aug 2011
Posts: 13,409
J
jdk1985 Offline
THF Celebrity
Offline
THF Celebrity
J
Joined: Aug 2011
Posts: 13,409
Originally Posted by 603Country


As a woodworker, I’d rather build new cabinet doors than do the detail work to refinish recessed Panel doors.


A lot of truth to this.


Instagram @justinkingwoodworking
Re: Refinishing cabinet doors [Re: CharlieCTx] #7608215 09/16/19 08:39 PM
Joined: Jul 2007
Posts: 359
S
soonerdg Offline
Bird Dog
Offline
Bird Dog
S
Joined: Jul 2007
Posts: 359
If what you're wanting is to just repair scratches I'd go with something like this. https://www.amazon.com/Vanitek-Total-Furniture-Repair-System/dp/B0759MYP7X/ref=asc_df_B0759MYP7X/?tag=hyprod-20&linkCode=df0&hvadid=216559542401&hvpos=1o2&hvnetw=g&hvrand=7036496566448351117&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9027279&hvtargid=aud-801381245258:pla-369194408382&psc=1. this will allow you to specifically target the scratches. If you go the sanding route, as someone said 400-800 is way too high. It will burnish the wood and not allow the stain to penetrate into the wood. For stain you don't want to sand any higher than about 180 grit.

To repair the clear coat you really need to know what it is. Here's a decent write up on how to tell. https://www.hunker.com/13402238/how-to-tell-if-a-finish-is-lacquer-or-polyurethane. If you have lacquer the you can just spray on another coat. the original lacquer will dissolve into the new lacquer and it should smooth itself out. If it's poly then I'd just thin it about 50% with mineral spirits and apply to the affected area with a rag or sponge. Sand in between with 350-400 grit sand paper and apply more coats, gradually increasing the size of the area until you cover the door. This will give you the best look. But if you only apply to the area that needs it you most likely won't be able to tell. Especially if it's only a scratch.

Last edited by soonerdg; 09/16/19 08:39 PM.
Re: Refinishing cabinet doors [Re: CharlieCTx] #7608246 09/16/19 09:08 PM
Joined: May 2013
Posts: 4,091
CharlieCTx Offline OP
Extreme Tracker
OP Offline
Extreme Tracker
Joined: May 2013
Posts: 4,091
Your're probably right about the marker/cover-up thing for the small stuff, I hadn't thought about that. I am left with one door with two big scratches the fridge repair guy graciously left and the area around our pull-out trash can thing, which has worn from there previously not having a pull on the door.

Thanks!
Charlie

Previous Thread
Index
Next Thread

© 2004-2024 OUTDOOR SITES NETWORK all rights reserved USA and Worldwide
Powered by UBB.threads™ PHP Forum Software 7.7.3