Now that I am thinking about it, with the objective cover I have, I don't know if it will come off to attach a Doubler. Bearclaw, do you know if there is a new lens cover now? I'll have to go home and look at mine, it just seem like it was on there really good if not permanently attached.

I don't know. I just tried and I'm not comfortable finagling any harder. Scared I'm gonna mess it up. I'll take a picture and see what you think.

Tyler, what dvr do you recommend?

Sightmark says yes the flip-up lens cap will come off.

I have a question.....I tried sighting in my XT today and ran out of adjustment for the windage (left to right). I maxed out and I'm still a couple inches to the right at 100 yards...any idea how I can get the scope dialed in?

Thanks!

I havent seen or heard of this issue with the Photon, unlike the x-sight. Are you sure that your rings and bases are straight? With these we have to put our own rings on, there is the possibility something is off off just a hair. I would check that first and either loc-tite or steal the wifes fingernail polish to lock the screws down.

I thought about this and double checked all the ring screws at the range, everything was pretty tight. I am assuming the rings are not perfectly lined up, but I'm not sure how you can adjust the direction of the rings.

What type of scope rings are you using? Thanks

If you are using two piece rings, then you can exchange the ring locations and or orientation to help line your scope up. This is one reason that some folks like a one piece mount, but they have their own set of problems.
First thing I would do is exchange the front ring with the back ring and see if that moves your x position to the other side. You can also experiment with rotating the rings so they tighten up on the other side. All of these things can change windage on two piece rings. If that is not enough, you can do some machine work or file work on the base mounts. I've done all of that with success. I had a similar problem with my first Sightmark, and finally got it sorted out so that there was very little adjustment to make to zero. It was never in the scope, it was the mounts.

What ring are you guys using to mount an external IR to the side of the scope? The one I got for it from UNV for the UNV20-IR wont fit and a cheap aluminum ring is cocked on the plastic rail but does hold. I need to move the flip up cover but it feels like its not going to move.

You need a weaver 1 inch mount. The mounts we sell are picatinny mounts.

Most folks mount their IR on the hand guard.

Work at it, the cover will come off.

have question got my photon now waiting on my lower to come in on wed now I just need to order my mounting rings what do you guys suggest Medium or high mount? its going on a ar15 flat top.i would like to stick with the 2 mount instead of the single
http://www.basspro.com/BLACKHAWK!-6-Hole-Picatinny-Scope-Rings/product/12050409001317/?cmCat=CROSSSELL_THUMBNAIL#chart-container