I am wondering if anyone has had any experience with an OnTime Feeder/Spreader? If not what brand what brand would you recommend/not recommend?

I use and like the All Seasons 100 lb feeder - Bucees has them for $249 - best price anywhere

I have one of those too. I bought mine from a feed store and I want to say I spent $320 or so. Still well worth the money. Very well built and works great, worth every penny. I have used the cheaper (still not that cheap) ones and they are all crap compared to the All Seasons tailgate feeders!!

All seasons all the way

Agree

yeah I priced them everywhere and around $350 was best I could find - then walked into Bucees and it was $249 - sweet! I have two of them

I made one out of 30 gal can and 2 inch tubing. I used the receiver hitch on the truck to mount it to, and used the left blinker to turn it on and off. It work great had the material laying around.

That is a great idea!!!

But what if you're turning right?

I dont make any right turn's

I bought one from Monarch and it works great.

Sorry dog I dont have it any more. I left the lease and did not have room for it. I tried to draw a pic and put it onhere but it did not make any since.

Mount a can any kind plastic, metal any thing on top of a V. Under the V will be your 12 volt D/C motor with the same size shaft as your spinner plate. I went to a wrecking yard and bought a blower motor . You will Weald 2 inch square tubing the closed side of the V at angle. This is to raise it off the ground so you dont tear the motor off going up or down hills or creeks etc..
At the base of the 2 inch tubing Weald another 2 inch tubing to it. This will go into your hitch.
Leave room below the can to slid a piece of plastic in the opening to close it off so you dont lose corn going down the road.

..... <.
____/ S
^ this go's into hitch , S is the 12 v motor mounted under the can you will mount the can on top of the < .

Must be a NASCAR driver.