Stiletto style mother of pearl dagger

Here's a stiletto style dagger that I made from bar stock. The blade is 154 CM stainless and the fittings are 416 stainless. The handle is mother of pearl with a fileworked frame and carved bolsters. Overall length is just short of 14 inches with a 9 inch blade. I'll have it on my table at the Dallas show June 13/14.

https://youtu.be/n5MF95wOTZU

That's really nice work Jason. A lot of time & effort went into the details on that one.

Over the top Jason!

Jason, you did good.

Looks great Jason. Looking forward to getting my knife from you.

See if this will work.... Nope... don't know why it won't respect the IMG tags
[img]http://www.bladeforums.com/forums/attachment.php?attachmentid=548276&d=1433084229[/img]
[img]http://www.bladeforums.com/forums/attachment.php?attachmentid=548278&d=1433084335[/img]
[img]http://www.bladeforums.com/forums/attachment.php?attachmentid=548280&d=1433084666[/img]
[img]http://www.bladeforums.com/forums/attachment.php?attachmentid=548279&d=1433084423[/img]

Burns, yours and several others are on deck for after the show.

Not a problem, good luck at the show.

Really Nice!