I need to make a tool kit to live in my UTV, what would you put in yours?
List format
Posted By: Old_Town
Re: UTV Tool Kit - 09/03/17 07:16 PM
I would get only snap-on. Only the most exspensive will do. Be sure to post pictures when you can. jK
In all seriousness, I carry a 9-1 screwdriver, channelocks, needlenose and some strippers, a few tyraps, tape and self tapping screws. I mainly carry tools to work on feeders.
Posted By: TEXASLEFTY
Re: UTV Tool Kit - 09/03/17 07:33 PM
Harbor freight sockets are strong... I don't have one so can't be much help other than that.
Snap on tools have a place, their wrenches and tool boxes.... nothing else is on their level.
Posted By: 68rustbucket
Re: UTV Tool Kit - 09/03/17 08:30 PM
What about a jack? What type of jack is most popular for the independent suspension on most utv's?
Posted By: jhenderson
Re: UTV Tool Kit - 09/03/17 10:00 PM
Strap unless you have a winch, lug wrench, tire kit and a compressor. Not much else you can fix on the side of a trail. Jack is always helpful too.
Posted By: Pigsicles
Re: UTV Tool Kit - 09/04/17 10:51 AM
Flat repair kit with a couple CO2 cartridges, a good multi tool,a piece of bailing wire and a flashlight/headlight.
Posted By: Vern1
Re: UTV Tool Kit - 09/04/17 01:26 PM
A standard 30mm ammo box makes a dandy, durable watertight tool box.
Put a couple of old towels or tshirts in there to use as rags and to wrap around the tools to keep them from clunking around in box as you drive.