Camo Ext. Deer stand panels?

Anyone know where I can get either sheet metal, aluminum, or vinyl sheets for a deer stand? Prefer big sheets!

Mueller Buildings lists R-panel or U-panel in Mossy Oak Bottomland Camouflage. If not in stock they will order it.

I suggest camo fiberglass corrugated sheets. Sutherlands in Alice has them. I know that doesn't help you much, but something to look for. I use them for blinds on a PVC frame and they work very well. Cutting them can be a pain though.

To cut them just turn your old woo blades around on your circular saw and let her rip.....

What are the dimensions and how much $$

Where did you find that at?

I have a Sweetwater Steel Co. catalog. Sweetwater Steel is owned by David and Steve Mueller.
Ok did some research and the Muellers sold Mueller Metal Buildings. Still may be worth a try to order from them.

Next time I am out near Weatherford I will run by Mueller and check with them. I might just go with a Powder coated sheet from Smileys racing or the 1/4 sheets from monarch and have it wrapped.

http://www.smileysracing.com/shopping/productDetails.aspx?i=97344&c=1752
or
About half way down page
http://deerfeeder.com/porches.htm

The sheets at monarch are vinyl. If you are thinking of wrapping them just go with wood and wrap it or buy the plywood with the camo already on it. I believe lowes and home depot sale it.

I am wanting to keep weight and maintence down! Something that will never rot

look into PVC sheeting. we normally just buy the black sheeting and use self tapping screws to fasten to blind or rivets. Not that much more expensive than plywood.

Got any pics how it turned out?

Be careful with the vinyl stuff. I have seen the weather be rough on them. You might even look into aluminum or tin sheets.

Yeah I called on 24 gauge sheet metal and I can get it for $16.00 a sheet. The PVC is $34 a sheet but that is in beige.

Where are you pricing the sheet metal at?

Commercial metal

I picked up a new camper door and sheet metal today. I should start the new stand this week. 5x8 on 12 foot tower.

huntguide
what is this PVC sheeting and where? i am not familiar with it

thanks

I actually need to get two 4x8 sheets of smooth fiberglass or aluminum to repair the exterior of my RV. Anybody know where to get this in Arlington/Fort Worth? My buddy clipped the rear corner of the RV and I need to repair it.

Smileys racing in Mansfield has 4x10 alum. powdercoated for $60-70 a piece

Gracias

throw some duck tape over were ya cutting, smoother cut

Sweet Water Steel will manufactor camo R Panel what ever length you want. kida high but very cool.

oops its Sweetwater stell. phone 325-235-3644

Lowe's & Home Depot have the Camo Wrapped Plywood sheets. I think they are about $50

To answer those who mentioned the camo vinyl siding its WildSide Camo

Do you know where to get camo flat sheet metal ?

They fade