260 Rem

Anyone load for it?

Yep, great round. What's the question?

CCI 200
140 A-max even with the lands (if it'll fit in the mag)
H-4350 42.0 - 44.0 start low and ease up looking for pressure.

24" barrel made 2800 fps.

Lapua brass
Fed 210m primer
140 berger vld
42-44 h4350
.030-.050 off

Lapua brass
CCI 200
130 Barnes TSX FB
44.4g IMR 7828
2.8" oal

For varmints and central TX deer
100 Sierra hp
45.4g H380

Not a very picky round in any of my 3 rifles. Shoots nearly all combos well. I have 1x9 barrels and no. Need for the 140g stuff. Very nice combo of low recoil, low noise, accuracy and knockdown are great.

DPMS LR-260H, Hog killer

I neck up 243 brass,it's cheaper than 260 brass and since I'm hunting it's hard to find in the field most of the time.
140 Sierra GameKing for most uses
42.0 grains H4350
Winchester or CCI primer
2.810 oal to fit in magazines

42.7gr aa2700
130gr vld
Fed gmm lr primer
Just a kiss of the lands

Put 20rds inside a quarter at 200yds

Thanks guys.

See above.

120grn nos ballistic tip
43.5grn imr 4350
oal 2.65
primers win
brass
ikka 260 tactical

85grn hollow point
48.0 grn imr 4350

Note on my post above oal is 2.86 not 2.65