AAC Handi Rifle hammer spring

I've got a 300 AAC Handi Rifle and I want to add a harder hitting spring to make military type primers work better. I've got a bunch of already primed cases that have CCI #41's in them. I can of course go to a softer primer in the future but would like to keep my primers consistent if I can. Anyone know much about these? I'm getting a bunch of fail to fires but the primer is getting impacted.

bump

https://www.gunsprings.com/H%20&%20R/TOPPER%20SINGLE%20SHOT%20SHOTGUNS/cID2/mID27/dID131

you need the single coil. the double coil is for the old models

Nice that's what I needed to know. I appreciate it!!

A friend of mine had the exact issue with his.
He sent it in for repair.

I bet he didn't have this spring info.
Thanks for the link.
It may come in "handy" down the road.

I'll order one and report back

take off the hammer extension and see
if the misfires continue.
the factory springs are crap anyway, and
if i need to go inside for any reason it
gets a wolff spring