Posted By: passthru
Gas tube length - 03/16/16 12:18 AM
I am waiting on my form 1 to be approved. I have a 10.3" DD barrel and I'm not sure what length tube to get. Carbine length? Once I get that figured I will order that, gas block and hand guard.
Posted By: TexFlip
Re: Gas tube length - 03/16/16 12:20 AM
Depends on the location of the gas port. Could be carbine or pistol on a 10.3
Posted By: passthru
Re: Gas tube length - 03/16/16 01:01 AM
The one I'm looking at getting is 7.866" long.
Posted By: SapperTitan
Re: Gas tube length - 03/16/16 01:24 AM
You need to look at the specifications for the barrel. The description should say if its carbine or pistol length gas system.
Posted By: SapperTitan
Re: Gas tube length - 03/16/16 01:26 AM
Looking online looks like its a carbine length gas system.
Posted By: passthru
Re: Gas tube length - 03/16/16 01:29 AM
Manufacturing # / SKU 10.3"_Carbine_GOV_Barrel
Restricted Shipping No
Caliber 5.56mm NATO
Barrel Length 10.3"
Manuf. Process Cold Hammer Forged
Twist Rate 1:7
Muzzle Thread 1⁄2×28 TPI (Threads Per Inch)
Material Chrome Moly Vanadium
Outside Finish Mil-Spec Heavy Phosphate
Inside Finish Chrome
Gas System Carbine Length
Diameter At Gas Port .750″
Barrel Extension A4
Profile Government
Weight 1.15 lb
Manufacturer Daniel Defense
Posted By: passthru
Re: Gas tube length - 03/16/16 01:31 AM
Good advice. Thanx. It also helped because the gas block I was fixin' ta order is .742 and I need one to fix a .750.
