Posted By: Growley
Need armorer or gunsmith in FW to install night sights - 02/24/16 06:04 PM
I don't want to do it myself. I called one place and was quoted $50 per gun to install sights I already have (I have 2). That seemed a like it might be a little high to me. Any recommendations on where to go?
Posted By: PiePuncher
Re: Need armorer or gunsmith in FW to install night sights - 02/25/16 01:57 AM
That sounds fair. . What type of pistol? XD? XDm can be tough.
You could do it yourself. Glock would be easy with a sight pusher or you could just use a punch and remove. You could damage the old sights with a punch if they are polymer like the glocks
Posted By: Normanpig
Re: Need armorer or gunsmith in FW to install night sights - 02/25/16 04:12 PM
I had a armscoat in McKinney knock some in a h&k for $20. Check with some coating / hydro dip guys. My assumption is they do it all the time. McKinney is a bit of a drive for you.
Posted By: Growley
Re: Need armorer or gunsmith in FW to install night sights - 02/25/16 08:43 PM
They are Glock 19's. I'm not afraid damaging the old sights, I just don't want to mess up the new ones or the slides. I'd rather pay somebody than chance it. I'll pay $100 if I have to.
Good idea Normanpig! I'll try that. Thanks!
Posted By: glb1955
Re: Need armorer or gunsmith in FW to install night sights - 02/25/16 10:10 PM
Too bad you aren't closer to Brazos County. I would do it for free.
Posted By: J McCoy
Re: Need armorer or gunsmith in FW to install night sights - 02/25/16 10:15 PM
Ship me your slide with sights, I'll ship it back. $25 and shipping. PM if interested.