Lets see your SBR's

Show your cards and list the specs

Well mine will be a few months. Just picked up a lower and going to send off for the stamp next week. Plan on building an 8" 300 blk.

Daniel Defense MK 18 factory upper.
DD Chrome BCG.
RRA lower.
RRA LPK.
Geiselle SSA Trigger
Magpul grip
B5 SOPMOD stock
TLR-1 Light
Aimpoint Comp M3 Red dot; Larue Mount

Finish is deceiving in this picture. Upper and lower are much closer to the same finish actually.

Keep it simple method. ^

What makes in and SBR? Under 16"

Yes

An SBR, according to the NFA, is any firearm with a buttstock that has a rifled barrel of less than 16", or an overall length of less than 26". The total length is measured with buttstock in the extended position.

8" 300 Blackout

5.5" 22lr with Huntertown Micro Guardian under a 7" Fortis rail.

Texflip is that a 10" rail on the 300?

Yes, it's a Spikes BAR2.

Model 1 11.5" upper / Palmetto lower
Magpul grip
Sopmod stock
Aimpoint CompM2

Hellpup AK
Magpul grip
Plum furniture
PA red dot on RS Regulate mount

Spikes Lower & Upper
7.5" Lother Wather barrel
Spikes BCG
Spikes STAB
Spikes BAR
Spikes LPK
Magpul MIAD
Magpul CTR
Magpul ASAP QD
Magpul front & rear sights
KNS Pins
Aimpoint H1
Larue mount

10.5" rainier match barrel
Rainier upper
CMMG 9" handguard
BCM low pro gas block
Spikes carbine gas tube.
Larue SPR-E
SWFA 1-4
Magpul MBUIS
Custom suppressor

Nice sbr's! I did my paperwork on feb 7, already have my pistol lower engraved and a 8.5 novesek 300 blackout barrel. Just waiting on the ok! Im doing a hogue midlenght tube, as i want it smooth. Yhm ss phantom or titanium, cant decide which one i want to use on her yet. I may be turning my wifes ar into a sbr sooon also!

M92 pap with a few goodies

12.5" Brux 6.8 SPC Cryo treated/DLC coated barrel
Lonestar Armory billet upper/lower receivers
TI-7 butt stock
Lancer carbon fiber handguard
JP FMOS bolt carrier-QPQ black finish
Raptor charging handle
Timney trigger
SLR adjustable gas block
Leupold 1x6 multigun scope with LaRue mount
Jet Suppressor

Yall need to stop posting these weapons, it's making it very hard for me not to dump my paycheck on an SBR right now.

I like that AR. Simple.

I like simple.

Aren't yawl afraid of shooting your hand off

Love the color Kyle! I can't wait till it gets beat up a little for some more character. That thing is awesome. I don't know why I dig the bronze so much now but I do!

Nope. I don't put my hand on the end of the barrel

Appreciate it. I'm digging the color too. Lol also waiting to get some wear on it.

SBR. Super Bad*ss Rifle ?

7.5" piston 223, 11.5" piston 223, integral suppressed 9mm


45acp UMP conversion


5.5" 10/22


7.5" AK


M11/9


8" 308

Just changed the handguard to M-Lok on mine. 10.5" 5.56.

12.5 PSA 6.8 SBR

Here's mine:

Top is 8.5" 300 BO with AAC Cyclone
Bottom is 10.5" .223 with TB 30-PS




11" .223 Mossberg MVP with Photon XT Digital NV and TB 30-PS



Top is 5.5" AR/.22 LR with SSparrow
Bottom is 10" Remington 597 that has an AAC Element to go on it

Pap SBR


Left to right-
.300BLK 8" AAC upper
5.56 11" upper
AR-10

10.5" Seekins upper/ Stag Arms lower SAS .223
Horus Talon 1.5-8x LaRue mount

What's not to love about a short barreled bolt gun

.300Blk 7.5" Barrel

Phantom M2 QD?

Some nice looking rifles herecso thought I'd add a few more.

223 wylde 12.5" ARP barrel w/ACOG


6.8 SPCII 12.5" ARP barrel w/Vortex Razor HD 1-6, DBAL and a L3 LWTS thermal

Yeap that doesnt suck. Very nice rifles.

Ryan F.... Phantom LT, QD

Thanks Drew!

Nice!

I really think it's crap that SBR's are an NFA item.

Spikes Lower
DD MK18 5.56 upper 10.3" barrel
Leupold Mod 1 1.5-4x20 Larue mount
AAC 762SD can

Started on a 300 Blk out build recently.
RRA lower
Spikes upper
Magpul grip and stock

I disagree. 16" is safe, while 15.9" and below is extremely dangerous.

In many countries, you can buy a 100% legal suppressor anywhere for under $100.

Crazy thing: Glock makes a disposable suppressor. Not available in the US for obvious reasons.

Didn't know that.
I guess the Econo-Can suppressor could be considered partly disposable. Only the adapter is registered. Use an oil filter and then toss it after.
http://www.guns.com/2012/08/07/oil-filter-suppressor/

Guess I'll get us back on topic.
Bottom rifle is a 8.2" Noveske 300blk, AAC 51T flash hider, AAC SDN-6 suppressor, Troy guard with squid grips, Streamlight TLR-1, Spikes lower, BAD lever, Anti-roll pins, Geissele SSA trigger, ERGO grip, Magpul STR stock, Burris XTR QD rings, Pride Fowler RR-Evolution-BLK scope. Did the color fill myself with nail polish, er, I mean tactical enameled paint.

8.1 Noveske 300AAC Supressed Inforce Light.

TacSol 9" .22 SBR upper on one is my SBR lowers

With Gemtech can


without can

10.5" mutt .300BLK

10.5" 5.56 A2 w/ tactical beverage holder (not mine, just thought it was awesome and they need to make a rail mount version)

Everybody needs to quit posting, as it's not helping my wait for my permission to put my sbr together! Im on day 53 today on form 1 efiled, when i filed the wait was 3-4 weeks, but that time has exploded! Nfa tracker shows feb 3 are coming thru now, mine was filed feb 7. So close, but so far away. Nice sbr toys, keep the pics coming!

6.8 in 10.5" noveske polygonal barrel. Love shooting this gun!

Finished it up a few weeks back
BCM 11.5" 5.56
Trijicon Acog w/Larue Mount
Silencerco SpecWar 7.62