I've got a Ruger 77/357 that's been restocked with a Boyds laminate and threaded 1/2x28, as well as had a Volq trigger sear installed. I initially purchased this for wanting to shoot subsonic lead loads, but couldn't get them to shoot/feed like I could the jacketed reloads. The rifle also has a Leupold VX-R 2-7x33 scope, sitting in Ruger factory 30mm rings. Probably about ~400 rounds in total down the barrel.
The stock came from Boyds about 50% relieved for a bolt handle, and their customer service was non-responsive; so I relieved it myself. It's not the prettiest wood work in the world, but it gets it done, and you wouldn't know unless you looked at it. The stock also has very faint jaw marks from being in a vise.
Edit: It'll run 158 XTPs at 1750 FPS behind H110 or Lil' Gun for those wondering.
The rifle also comes with the cheek pad pictured, factory Ruger 1" rings, and the factory black plastic stock.
The threading was performed by Mark Pharr of Tumbleweed customs in Round Rock.
Asking $1100 cash; not interested in trades.
Shoot me a PM on the forums, or an email at firstname.lastname@example.org if interested.