I don't have any people to suggest, but if your a hands on kind of person it is pretty simple to do and will save you a lot of money. I think I did mine for less than $20 in materials and was a definite improvement.
I usually just buy the accraglass kit and DIY it. It's pretty simple to get right and does not take much time. Use plenty of release agent, make sure all your prep work is done, and have a plan of action before you mix the epoxy. It sets up pretty quick.
Smokey Bear---Lone Star State.
Their are lots of utube vidieo on glass bedding. The main thing is to sand down to bare wood ware you want the beding to stick. Mask every thing else then put release agent on the metal. I hope this helps you.