Just a thought, it's a lot cheaper and easier to put a stock on an AK pistol and turn it into an SBR than it is to cut down a rifle.
I can totally understand that but in my understanding thisrigle was made to be SBRd
Ok, was not familiar with that model, had to look it up. And yes the SLR 107 CR is made to be easily SBR'd. After reading up on it, that looks easier than putting a stock on a AK Pistol, you could do that one yourself. Just make a square cut and use a crown cutter with a pilot by hand to clean it up.
If you have a hacksaw the tools to face the muzzle will run you about $100 from Brownells.
Edited by VAFish (02/26/18 09:06 AM)
"If your plan is for one year, plant rice.
If your plan is for ten years, plant trees.
If your plan is for one hundred years, educate children."