I have an HHA Optimizer Lite XL TX-5500 single pin and love the darn sight but with my new arrows, the sight canít move enough to get a 50 or 60 yard when I last shot it. The newer HHA single pin sights have a sliding bracket so you can find that sweet spot. The older models had 2 hole mounts running down the housing bracket. I mounted it on the lowest set and couldnít get it high enough to get past 45 yards and when I moved it up to the next set on the bracket, I couldnít get it to go low enough to get a 20yard set. So since my Mathews LX isnít the fastest bow at 62# draw and a short 26.5Ē draw length, I am going to put the HHA single pin sight aside and use it on the Mission Ballistic 2.0 70# draw weight that I plan on picking up early next year.
I was thinking about picking up another LX with 70# limbs and swapping them out but just buying a new sight for it sounds like less work lol. So I am looking at the Axcel Armortech 5 and 7 pin sights and the IQ Bowsights Pro 5 pin sight. Both with the .019Ē pins and in left hand. I know that you can switch the bubble level on the Axcelís sights to make them left hand sights and am wondering if I can keep the bubble level on top when I flip it. Since they are out of the housing ring. I actually like the bubble level being on the top and I somehow shoot better groups that way. Lots of sights to choose from these days so this is going to take some time tomorrow at the local archery shop. But it should be a fun time lol.
Edited by bowbuilder1971 (11/17/17 12:38 AM)