Tricked out Ruger 10/22 that I hand picked the parts for and then had a gunsmith assemble due to my hands disability. I have $1334 in this rifle but will take $1250 CASH because I just don't have a use for it. It was completed about a year ago. It has never been fired! Below is a list of parts that make up the whole of the rifle. PM me w/questions concerning sale or trade, the only trade I'd consider is a Rem 700 .243. Absolutely NO PISTOLS.
Factory Ruger Bolt Polished on the ejection Port side and Etched with the word RUGER.
This bolt has been trued and squared, adjusted the head space to .043 (reduces fliers and makes for better groups.) Radiused the back of the bolt to reduce drag as the bolt pushes the hammer back, polished all points of contact on the bolt to reduce friction, chamfered charging handle slot.
Head space adjustment and truing service by gunsmith. This is one slick bolt!
Revolution Stock (Extreme Fire and Ice)
Timney Trigger Competition 2 3/4 lb. Black with BLACK shoe w/ ˝ extension lever
Barrel is Green Mountain Ruger 10/22, 20” X .920 Stainless Steel Bull barrel in .22 LR. It’s a High Grade Barrel with a 1:16” twist. Minimum bore/groove diameters are .2165 / .221. Weight 3.5 lbs.
Tactical Innovations Satin “Stainless” Elite 22 Billet Precision Machined Receiver
Tactical Innovations Receiver Cross Pins Precision Ground and Hardened
Tactical Innovations Sharp Claw Extractor and Spring Assembly
Tactical Innovations Stainless Steel Offset V-Block
Tactical Innovations Stainless Steel V-Block Cap Screws
Tactical Innovations Firing Pin Assembly
Tactical Innovations Receiver/Stock Takedown Cap Screw
Tactical Innovations Fluted XL Charging Handle Assembly is Matte Black and Crimped Rod
5 - 10 round Ruger magazines
Bipod 6” - 9”
Leupold Vari X3 3.5 - 10 X 40 + rings