I have to credit my SIL for passing along this useful tip in setting up a pop out blind, the type that you first fold out and then pop out each side and top. As anyone who has ever attempted to put one of these up for the first time knows, it can be very frustrating to say the least, even with someone assisting you. By following the steps below, a person working alone can have one of these up and ready in just a few minutes.
Once you let it unfold from the stored position with the sides and top not yet popped open and with the camo side out and showing, the trick is to begin by first staking one side to the ground and then pulling out that side. This will keep that side held in poisition as you move to either of its adjacent sides. Moving around the blind in a circular fashion, contine to each adjacent side until all four sides are pulled out. Stake all the remaining sides before pulling out the top.