Great opportunity for somebody to get into the PCP airgun game on a budget. I acquired this gun in a trade so I'm not sure about some of the specs. I do know it has an aftermarket "moderator" aka "silencer" on it although I'm not sure of the brand. I think the trigger might be aftermarket just based on some pictures I have seen of factory guns and looking at some aftermarket triggers online. I do know the trigger is much much better than my tuned Benjamin trail. The scope is a 4-16x40ish CenterPoint. It isn't the greatest but it gets the job done. I think it was probably packaged with the gun from the factory. It has an illuminated mil dot reticle and an adj objective. When I got it I checked POI and then proceeded to shoot 4 eurasian dove at about 25 yards, and a rabbit at 40ish. I'm not going to ship it as I feel like it needs to be degassed to do that and I don't have the tool. I will fill it up before the buyer picks it up. You will need either a high pressure hand pump or a scuba tank to refill it. Pumps can be had for around $180 from pyramyd air and tanks can be purchased from your local dive shop. It has a bit of surface rust on the barrel, looks to me like it could be cleaned up easily. The moderator is held on with set screws and there are a couple of screw marks just behind the moderator on the barrel where the previous owner mounted the moderator before and then moved it. $240 picked up.
Just shot this 10 shot group at 20 yards. There are 10 shots within that circle that I scratched on the paper. I know it can do better, my dog was sitting over me on the tailgate shaking the truck the whole time. I am slightly concerned about the scopes ability to hold zero therefore price drop to $225. Might not be anything wrong with it, but POI wasn't in the same place as it was the last time I shot. These were a new brand of pellet that I haven't shot before and that could have something to do with it being off.