100+ Yards Digital Night Vision scope clip-on
Priced at just $600 at [url=http://www.digitalcrosshairs.net][/url] www.digitalcrosshairs.net
Why pay $1000's to make a 100 yard shot? Affordable night vision.Call 404-590-6513
Imagine, night vision on all your scoped guns with just one device. Use it day or night. No re-zero needed. Why be limited to one rifle for night hunting. No complex menus just turn it on and go hunt! Simply target by looking at the crosshairs on the screen.
This is digital night vision build on a PC1099 HD CMOS image sensor, compare with units that cost thousands more and use lower definition components.
• 100+ yard clear night vision
• 6+ hour battery life per charge
• About 30oz with illuminator (including batteries)
Biggest night vision mistakes:
The biggest mistakes hunters make when shopping for night vision
is paying too much or buying Gen1 because it’s cheap. Digital FOV
makes affordable quality night vision for shots under 150 yards.
Digital FOV has revolutionized the night vision clip-on scope adapters market with the introduction of the Digital Crosshairs product line that uses an eyepiece attached Digital Night Vision sensor with a rail mounted LCD display for targeting.
This system looks down the scope and displays the scope’s crosshairs on the LCD for targeting. It will focus on the scope’s lower magnifications with a standard scope.
If the scope has an adjustable objective it will focus on all magnifications.
This is the world's first and only digital night vision device that utilizes a rail mounted LCD display for targeting. It can also be used with the optional wireless near eye targeting display that attaches to any standard eye wear.
This product’s modular design allows easy incorporation of advances in industry standard CCD chip (Charge Couple Device chip), as rapidly as they come to market.
The DC1000 uses the 962 x 504 pixels PC1099 CMOS to delivers high contrast and vivid night vision images utilizing all available light. Don’t be fooled by the high prices of competitors, digital night vision is mostly about the resolution of the CMOS sensor used and this PC1099 is very high definition.
The Digital Crosshairs 1000 does not need special riflescope ring adapters, simply two included reducing rubber spacers (can be used as necessary depending on the diameter of the riflescope's eyepiece) for a precise fit up to 50mm.
• Converts a daytime riflescope into a night vision riflescope
• 100-150+ yards night vision depending on scope and conditions
• Fine image quality and resolution
• Focusable 850nm long range IR illuminator
• 6+ hour lithium-ion power supply
• Weather resistant
• Instant power on
• Wide range of operating temperature
• Focus by adjusting eye relief
• Video output
• Adapter fits any size scope up to 50mm eye piece