Forums46
Topics538,021
Posts9,731,906
Members87,055
|
Most Online25,604 Feb 12th, 2024
|
|
|
clear for pistol grips
#6231630
03/21/16 08:17 PM
|
Joined: Feb 2016
Posts: 132
durda1
OP
Woodsman
|
OP
Woodsman
Joined: Feb 2016
Posts: 132 |
I just finished cutting new pistol grips and was wondering what to use for the best clear coat protection. Thanks,Brad
|
|
|
Re: clear for pistol grips
[Re: durda1]
#6231638
03/21/16 08:35 PM
|
Joined: Sep 2008
Posts: 16,729
KC
THF Celebrity
|
THF Celebrity
Joined: Sep 2008
Posts: 16,729 |
I would use satin poly if you want to keep the finish as near to the natural wood as possible, although it will darken it some. If you want the standard of the industry it's Tru Oil, although it has an amber cast to it. IMO it makes the best finish for a rifle stock or pistol grip, if you apply it correctly.
|
|
|
Re: clear for pistol grips
[Re: durda1]
#6231640
03/21/16 08:36 PM
|
Joined: Mar 2011
Posts: 2,101
Colt W. Knight
Veteran Tracker
|
Veteran Tracker
Joined: Mar 2011
Posts: 2,101 |
What type of wood did you use, and was it dried/cured or did you cut it from a tree/log?
There isn't a right answer for this question, and depending on what type of sheen you want, you could go a lot of different directions. The easiest thing would be to wipe on a lot of coats of a drying oil like Danish Oil/Tung Oil, Boiled linseed oil or even something like Birchwood Casey Tru Oil. Wipe on a few coats, let it dry, repeat a bunch of times.
If you wanted a slick, smooth as glass finish for presentation grade, there are a lot of steps.
Here is my recommendation.
Sand the wood to 400 grit. Blow/wipe off all the sanding dust. Wipe on a coat of drying oil like mentioned above. But wipe it on with a brown paper sack, and rub it smooth and almost dry. Let it sit and dry, repeat 3x a day for about 3 days.
Generally speaking, oil based polyurethane you buy in the store for cabinets is not UV resistant and will yellow and fall apart exposed to sunlight or moisture. Firearms manufacturers use a polyester finish which was designed for automotive finishes and it is super tough but not available in the hardware finish section. Then there are lacquers, shellacs, enamels, and mixtures and waterbased and solvent based versions of all. It can get confusing quick. In reality, you probably wouldn't notice much difference between any of them if you don't expose them to the elements.
Last edited by Colt W. Knight; 03/21/16 08:40 PM.
|
|
|
Re: clear for pistol grips
[Re: durda1]
#6231660
03/21/16 09:00 PM
|
Joined: Feb 2016
Posts: 132
durda1
OP
Woodsman
|
OP
Woodsman
Joined: Feb 2016
Posts: 132 |
It's Leopard wood. Still have to shape and sand. I haven't decided if I want a glossy look or not.
|
|
|
Re: clear for pistol grips
[Re: durda1]
#6231675
03/21/16 09:13 PM
|
Joined: Mar 2011
Posts: 2,101
Colt W. Knight
Veteran Tracker
|
Veteran Tracker
Joined: Mar 2011
Posts: 2,101 |
With that figured wood, I would recommend using a polymerized finish ( like Tru Oil) because it will bring out the Chatoyancy of the figure in the and make it "pop" much more and look more 3-D. You can do a satin or gloss finish with Tru Oil. I use a base coat of Tru Oil on my guitar builds when using figured wood
Last edited by Colt W. Knight; 03/21/16 09:18 PM.
|
|
|
Re: clear for pistol grips
[Re: durda1]
#6231690
03/21/16 09:22 PM
|
Joined: Mar 2011
Posts: 2,101
Colt W. Knight
Veteran Tracker
|
Veteran Tracker
Joined: Mar 2011
Posts: 2,101 |
Nice job refurbishing that old Spanish pistol.
|
|
|
Re: clear for pistol grips
[Re: durda1]
#6231704
03/21/16 09:43 PM
|
Joined: Feb 2016
Posts: 132
durda1
OP
Woodsman
|
OP
Woodsman
Joined: Feb 2016
Posts: 132 |
Thanks, this is my first attempt.
|
|
|
Re: clear for pistol grips
[Re: Colt W. Knight]
#6231711
03/21/16 09:53 PM
|
Joined: Dec 2009
Posts: 5,455
Big Fitz
THF Trophy Hunter
|
THF Trophy Hunter
Joined: Dec 2009
Posts: 5,455 |
With that figured wood, I would recommend using a polymerized finish ( like Tru Oil) because it will bring out the Chatoyancy of the figure in the and make it "pop" much more and look more 3-D. You can do a satin or gloss finish with Tru Oil. I use a base coat of Tru Oil on my guitar builds when using figured wood Wow! That is a work of art. Very impressive.
I was wrong...on anything technical. Fitz............. is right, ya know............
|
|
|
Re: clear for pistol grips
[Re: durda1]
#6231736
03/21/16 10:18 PM
|
Joined: Nov 2007
Posts: 9,523
RiverRider
THF Trophy Hunter
|
THF Trophy Hunter
Joined: Nov 2007
Posts: 9,523 |
You're a pretty talented fellow, Colt.
"Arguing with you always makes me thirsty." -Augustus McRae
|
|
|
Re: clear for pistol grips
[Re: durda1]
#6232310
03/22/16 12:08 PM
|
Joined: Jan 2013
Posts: 19,652
Pitchfork Predator
THF Celebrity
|
THF Celebrity
Joined: Jan 2013
Posts: 19,652 |
That leopard wood looks great on that pistol.
|
|
|
Re: clear for pistol grips
[Re: durda1]
#6232378
03/22/16 01:14 PM
|
Joined: Feb 2016
Posts: 132
durda1
OP
Woodsman
|
OP
Woodsman
Joined: Feb 2016
Posts: 132 |
That guitar is beautiful!
|
|
|
Re: clear for pistol grips
[Re: durda1]
#6232569
03/22/16 03:41 PM
|
Joined: Sep 2012
Posts: 1,938
Classic Rocks
Pro Tracker
|
Pro Tracker
Joined: Sep 2012
Posts: 1,938 |
I have fallen in love with the Deft semi gloss acrylic (aresol) and the Zissner shellac (aresol).
|
|
|
Re: clear for pistol grips
[Re: durda1]
#6232709
03/22/16 05:53 PM
|
Joined: Apr 2010
Posts: 1,499
charlesb
Pro Tracker
|
Pro Tracker
Joined: Apr 2010
Posts: 1,499 |
A formula that I use often is four parts Tru-Oil to one part Minwax mahogany stain applied in two coats, followed by straight Tru-Oil thereafter. The little bit of red makes a difference without over-doing it.
Tru-Oil has worked so well for me over the years that I haven't bought a can of linseed oil or tung oil in quite a while.
I put on a light coat, let it sit at least 24 hours, then sand or steel wool as required before the next coat. Once it has lost its tack, I generally move the piece outside so the low humidity and desert sun can do it's work. - An alternative would be a cardboard box oven with two 40 watt incandescent bulbs inside, for moderate heat.
The same El-Cheapo 'oven' is also useful for epoxy finishes - but that's another story.
Last edited by charlesb; 03/22/16 05:54 PM.
Kind regards, charlesb
|
|
|
Re: clear for pistol grips
[Re: charlesb]
#6232713
03/22/16 05:56 PM
|
Joined: Mar 2011
Posts: 2,101
Colt W. Knight
Veteran Tracker
|
Veteran Tracker
Joined: Mar 2011
Posts: 2,101 |
A formula that I use often is four parts Tru-Oil to one part Minwax mahogany stain applied in two coats, followed by straight Tru-Oil thereafter. The little bit of red makes a difference without over-doing it.
Tru-Oil has worked so well for me over the years that I haven't bought a can of linseed oil or tung oil in quite a while.
I put on a light coat, let it sit at least 24 hours, then sand or steel wool as required before the next coat. Once it has lost its tack, I generally move the piece outside so the low humidity and desert sun can do it's work. - An alternative would be a cardboard box oven with two 40 watt incandescent bulbs inside, for moderate heat.
The same El-Cheapo 'oven' is also useful for epoxy finishes - but that's another story. As a note - putting most woodworking finishes in direct sunlight while they are curing/drying will cause them to bubble. Oils typically do not do this
Last edited by Colt W. Knight; 03/22/16 05:57 PM.
|
|
|
Re: clear for pistol grips
[Re: durda1]
#6232735
03/22/16 06:17 PM
|
Joined: Apr 2010
Posts: 1,499
charlesb
Pro Tracker
|
Pro Tracker
Joined: Apr 2010
Posts: 1,499 |
I don't put them outside until the tack is gone, figuring that it would be a dust and insect magnet if it were still sticky at all. With my luck, that would be when the neighbor finally decided to mow his lawn.
I wonder if it would bubble up on me if I put one out there wet? I guess it would be a good idea to give it a try on a piece of scrap, see how it behaves. At 4500 feet, direct sunlight is pretty stout stuff.
Last edited by charlesb; 03/22/16 06:18 PM.
Kind regards, charlesb
|
|
|
Moderated by bigbob_ftw, CCBIRDDOGMAN, Chickenman, Derek, DeRico, Duck_Hunter, hetman, jeh7mmmag, JustWingem, kmon11, kry226, kwrhuntinglab, Payne, pertnear, rifleman, sig226fan (Rguns.com), Superduty, TreeBass, txcornhusker
|